LSD additive

[morbid]

quick question, if i have synthetic gear oil, do i still need the lsd additive?

[Scott T]

I used it in mine and I have a 2000 Firebird. It won't hurt it.

[morbid]

i'm working on the rear end now. the damn carrier won't come out. i've pried, i've pulled, i've cussed, but its sitting tight.

any ideas on how to get it out of there?

[PiLOTLiTE]

<blockquote>quote:</font><hr>Originally posted by morbid:
i'm working on the rear end now. the damn carrier won't come out. i've pried, i've pulled, i've cussed, but its sitting tight.

any ideas on how to get it out of there?<hr></blockquote>

Slip a long rope around the carrier, tie the other end to an SUV of some sort. Step on the gas and make sure the fbody doesn't come off whatever jackstands you have supporting it. :D [img]graemlins/thumbsup.gif[/img]

[morbid]

<blockquote>quote:</font><hr>Originally posted by PiLOTLiTE:
Slip a long rope around the carrier, tie the other end to an SUV of some sort. Step on the gas and make sure the fbody doesn't come off whatever jackstands you have supporting it. :D [img]graemlins/thumbsup.gif[/img] <hr></blockquote>

hahah! the sad thing is i already did do that minus the SUV. still won't come out. :( you guys know if there is a puller i can get for this bastard? it chewed through my last 2x4. :/

[Dominic]

<blockquote>quote:</font><hr>Originally posted by morbid:
quick question, if i have synthetic gear oil, do i still need the lsd additive?<hr></blockquote>

If its a torsen, no.

[9t9fb]

<blockquote>quote:</font><hr>Originally posted by morbid:


hahah! the sad thing is i already did do that minus the SUV. still won't come out. :( you guys know if there is a puller i can get for this bastard? it chewed through my last 2x4. :/<hr></blockquote>

Ok, did you make sure you took the end bearing caps off? Did you pull the axels out far enogh? If you did this steps a 2x4 should do the trick.Good luck.

[ December 14, 2002: Message edited by: 9t9fb ]</p>