1 piece ds over 2 piece

[Only4U]

is the stock steel 1 piece ds better than the stock 2 piece? well, is it a decent upgrade...or should you just go with the aluminum?

[Mogobs30th]

Go with a 1 piece, aluminum. Lighter, and wouldn't take so much power to turn as a steel 1 or 2 piece. I would like to try to find a carbon fiber DS if possible but I don't think anyone sells them for our cars. [img]graemlins/burnout.gif[/img]

[Red V6 Raider]

They do have a CF DS, but they are 800 dollars. Not really a worthwhile mod. But I wouldn't buy a 1 piece steel DS. Unless you feel you want to take that middle step. Otherwise, I would go straight for the aluminum. My .02

[pgriffith]

This has been covered in the READ ONLY archives listed on the bottom of the FOrums list. You should go read that post.. You will get all the info you need from that.

[Mogobs30th]

<blockquote>quote:</font><hr>They do have a CF DS, but they are 800 dollars <hr></blockquote>

[Mogobs30th]

<blockquote>quote:</font><hr>They do have a CF DS, but they are 800 dollars <hr></blockquote>

The CF driveshafts that I seen were only availiable for '98-'02 cars.

[Only4U]

i'm pretty sure all fbods from 93-02 are the same as far as driveshafts go...