Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Does anyone have a hurst or a B&M short shifter, and does anyone know where I can find one for sale? I am striking out so far finding one for my car. HELP!!! Also, does anyone know about how much I am looking at spending on one or the other? Thanks!
Chris
[img]graemlins/dunce.gif[/img]
Chris<br />1999 3800 Camaro<br />Arrest Me Red<br />M5<br />Power Window Conversion Completed 7/18/03<br />Waiting to get Viper Alarm Installed<br />Chevy Camaro. We\'ll be there. First.
Ok, I just found the B&M ripper on jegs.com , but it is $165 [img]graemlins/omg.gif[/img] . I know I have seen it for less. Help! And which do you guys like better? The B&M or the Hurst? I have grown up hearing Hurst (it was in the old man's race car), so I hate to jump ship, but it seems like lots of you are going that way now... Thanks!
[img]graemlins/dunce.gif[/img]
Chris<br />1999 3800 Camaro<br />Arrest Me Red<br />M5<br />Power Window Conversion Completed 7/18/03<br />Waiting to get Viper Alarm Installed<br />Chevy Camaro. We\'ll be there. First.
The hurst and b&m will always run you $150+ for new (prolly $160 on the bm). Expect to pay $20 to $40 more for a pro 5.0, afaik ... But I'd love to find a used one too. Keep in mind that you can use one from a 3rd gen t5 as well, and maybe (i'm callin' b&m) a mustang t5
-Rob
The B&M runs $165 and is the CHEAPEST of all the shifters and they have the shortest throw. The handle is about the same as stock. The Hurst runs about $190 and the same with the Pro 5.0 but with those 2 you can buy the lou's short stick.
2002 M5 Bright Metallic Silver <br />*Fully loaded and modded<br /><br />2005 GSXR 750<br />*Micron Serpent Race Exhaust *K&N Filter *Power Commander *Trying to hit 200 MPH!<br /><br />1970 SS 454 Chevelle Cortez Silver<br />*It can pass anything but a gas station
Just bought a Pro 5.0 Shifter form ThunderRacing for $166 shipped to my door
got in on a good GP
plan on buying a Lou's Short Stick to go along with it soon
R.I.P \'99 Firebird, you will be missed<p>New toy - 2001 GSXR-750, Yoshimura Exhaust, Power Commander, Rebuilt Airbox
at the track i let one of the guys from here feel the pro 5.0 in my bird, and he said it was ever shorter then his ripper (stock throw).. if you get the lou short stick.. ud be really small..
I would say go w/ the Pro 5.0 and getting Lou's Short Stick for another $40 if you have it. I got mine rom thunderracing. Make sure you tell the mit's for a 5 spd...they should give you the shifter for the 3rd gen 5 spd. Good luck!
hurst checking in ... paid like 175 from jegs I think, I have had it for about 8 months and am fairly happy. it definitley breaks in and becomes less stiff but it is still very sure when shifting.. have heard a number of people with the ripper say it never loosens up.. though there seems to be quite a following of new pro 5.0 guys.. I think they had just come out with it when I got my hurst.. not exactly sure... anyway that's a little more info for ya..
-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock:
I personally like my shifter still being "stiff". I like it when a shifter is very firm, not all shakey, and jicky like. But having drivien cars with the ripper, 5.0, and Hurst....I'll say I could hardly tell any difference, they are all good. But Lou's short stick was very nice to have on the 5.0 and Hurst...Wish I could get it on my Ripper.
<a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a> THE SOURCE!
Hmmmm... so you can't get the lou's on a regular ripper... only the 5.0 huh? Well, that helps some. And it sounds like the Hurst and the B&M are the same other than that. Now I just hope that I can still get it. I have to repaint my front end... I was involved in a hit and run in a parking lot. Someone mashed in my front end and now the paint is flaking off. :mad: :mad:
Chris<br />1999 3800 Camaro<br />Arrest Me Red<br />M5<br />Power Window Conversion Completed 7/18/03<br />Waiting to get Viper Alarm Installed<br />Chevy Camaro. We\'ll be there. First.
Is that the Hurst that will allow you to use Lou's? I can't seem to find the B&M 5.0 on the jegs site. *Sigh*. I miss being able to walk into a store, tell them what you want, and leave with it. Now it is so hard (but you get more options I suppose). Thanks for helping me out again guys.
Chris<br />1999 3800 Camaro<br />Arrest Me Red<br />M5<br />Power Window Conversion Completed 7/18/03<br />Waiting to get Viper Alarm Installed<br />Chevy Camaro. We\'ll be there. First.
Hi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...
Still trying to find oil leak on my Camaro, it’s a tough one. I think it is the oil pressure sender myself. Leaking when raving and going into boost....
4 days ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment