Tweet
Does anyone know what kind of bit you need and what size to take this thing out? It looks like a hex bit, but I couldn't see it real well. I'm asking before I end up going out to buy a hex bit set if they won't fit.
-
-
Re: Differential fill plug
Just throw a 3/8" rachet wrench on there. square socket.Drivetrain Moderator - "There are no stupid questions, only stupid people!"
2001 Pewter Firebird Y87, M5
Intake, exhaust, just about every suspension part, alum flywheel & ds, Turn One p/s pump and cooler
Go Sabres! -
Re: Differential fill plug
use a 1/2 in drive with a 1/2 to 3/8's adapter and should be good to go!!!www.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
Comment
-
Re: Differential fill plug
If the plug looks like this, then you'll need a 3/8" breaker bar with a short extension (for best results). You can probably fit a 3/8" ratchet in it, but it may be a knuckle grinder when it pops loose.sigpicComment
-
Re: Differential fill plug
Thanks everyone!Comment
Comment