Tweet
Tranny Swap
I am trying to put a 97 tranny and engine in a 98 I just found out that the tranny mounts are in different locations. Is there anyway to get this to work? It is off by 2 inches.
-
-
Re: Tranny Swap
are you sure? I put a 97 in my 00 no problem.
I guess I did use the 97 tranny mount. If that doesn't work, Maybe just a tranny crossmember.-Eric<br /><a href=\"http://www.cardomain.com/id/mustangeater82\" target=\"_blank\">2000 NBM V6 Camaro 5-speed</a> T-top <i>converted</i><br /><b>14.467@95.45mph</b> <i>$0 in mods</i><br /><i>The member formerly known as MustangEater8251</i> -
Re: Tranny Swap
did you reuse your tranny crossmember or did you use the one from the 97?Comment
-
Re: Tranny Swap
ehh???Originally posted by shenanigans
the 1998+ tranny's the mounts for the TQ arm and exuasht hanger are different..... they mount the same place but GM updated the tail shaft on these trannies. the bolts for the mount are farther apartwww.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
Comment
-
Re: Tranny Swap
so basically the 97 will not work?Comment
-
Re: Tranny Swap
no it will work you just have to get the mounts for the 1997 trannyOriginally posted by yank8200
i ahve a 1999 tranny in my 1997www.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
Comment
Comment