How hard is it install a aluminum driveshaft.

[BigRalph]

Hi everyone.

I'm thinking of buying an aluminum driveshaft from a z28 or ss camaro for my 01 v6 camaro automatic. How hard is it to sup the stock to the aluminum driveshaft? If you guys know how to do it could you please tell how to do it step by step

thanks.

[slow6]

Re: How hard is it install a aluminum driveshaft.

so easy
unbolt the 4 bolts (like a 12 or 13 mm) pull stock one out, put new in, bolt it, lower car.

[BigRalph]

Re: How hard is it install a aluminum driveshaft.

That sounds easy.

Thanks

[BobDoLe]

Re: How hard is it install a aluminum driveshaft.

so easy
unbolt the 4 bolts (like a 12 or 13 mm) pull stock one out, put new in, bolt it, lower car.

Do you lift both ends of the car at the same time, or can you get away with lifting just the rear? Don't you have to line the thing up or something?

[Shodown]

Re: How hard is it install a aluminum driveshaft.

If you can fit under the car by just lifting the rear then thats okay. I raised the front and rear cuz of my side skirt ground effects.

[slow6]

Re: How hard is it install a aluminum driveshaft.

you dont have to align the suspension
you have to put the DS on right
all you have to lift is the rear
its easy 5 min install

[SilverRS96]

Re: How hard is it install a aluminum driveshaft.

if u havent done this yet cuz the thread was from back in may i can help ya with it since im only 30-40 mins away