Quick Question - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Quick Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Quick Question

    I'm looking for gears for my car. I found some out of a 96 Z28, but then I got reading about how there's different carriers. Mine has the stock gearing in it, it's a 97 3.8. I pretty much am asking if these'll work in my car fine. If not, what would, and where would I get them?
    ~97 3.8L V6 Camaro~
    A few things

    Only Member of Team Hooker?!?

  • #2
    Re: Quick Question

    While doing gears I would look at getting an lsd also. Unless you already have one. If you get the lsd then it doesn't really matter what carrier just as long as the carrier for the lsd you get and the gears are the same. I'm pretty sure the gears you are looking at (the Z28 gears) are a 3 series carrier. I'm not sure what carrier you have though. I have a 95 and I have a 2 series carrier.

    Comment


    • #3
      Re: Quick Question

      Do you have an auto or a stick?

      Since you have a 97 3.8 you dont have disc brakes. If you want a serious upgrade look for a 00+ model rear with disc brakes and limited slip. Rember to check the door code for GU4, GU5, and GU6 for gear sizes.

      I recommend the 3.42s or 3.73s for street automatics, and dont forget changing gears needs a PCM reprogram for the new gear size for the automatic to work and the speedo to be correct. Do it right or dont bother :) If you have more q's PM me
      2002 5-spd NBM Camaro
      Details: www.1lev6.com

      Comment


      • #4
        Re: Quick Question

        Originally posted by Dominic
        Do you have an auto or a stick?

        Since you have a 97 3.8 you dont have disc brakes. If you want a serious upgrade look for a 00+ model rear with disc brakes and limited slip. Rember to check the door code for GU4, GU5, and GU6 for gear sizes.

        I recommend the 3.42s or 3.73s for street automatics, and dont forget changing gears needs a PCM reprogram for the new gear size for the automatic to work and the speedo to be correct. Do it right or dont bother :) If you have more q's PM me
        Ya, well I'm a 5 speed. I don't drive auto's, never have and never will:banana: . I was thinking 3.73's along with a LSD, but thought that if I could find one, I'd just get the whole rear-end out of a car and put it into mine. Then I'd get the brakes as well. I'm gonna run to the junk yard today I think and see what they got.
        ~97 3.8L V6 Camaro~
        A few things

        Only Member of Team Hooker?!?

        Comment

        Latest Topics

        Collapse

        FORUM SPONSORS

        Collapse
        Working...
        X