Tweet
is there a trick to it? I dont wanna keep prying if it isnt coming. I removed the 7 bolts on the inside and nothing.
-
-
Re: bellhousing off the trans>
Just unbolt the bell housing from the motor. -
Re: bellhousing off the trans>
i did that, but i bought a new transmission, and i need to transfer the bell houseing off the stock one onto my new one.Comment
-
Re: bellhousing off the trans>
If your sure you have all the bolts out tap on it with a hammer but not to agressively sometimes the stickComment
-
Re: bellhousing off the trans>
alright, i shot you an email, but i will just keep going at it that way.Comment
-
Re: bellhousing off the trans>
yeah try using a rubber mallet, a hammer with a washcloth over it will work too. Sounds like it's binded up.Comment
-
Re: bellhousing off the trans>
did you get it off ?Comment
-
Re: bellhousing off the trans>
im going home to work on it tonight.Comment
-
Re: bellhousing off the trans>
not budging, im hitting the hell out of it, maybe i should try to heat it up some how?Comment
-
Re: bellhousing off the trans>
heating did not work, i got the tail housing off in 2 min, what the hell?Comment
-
Re: bellhousing off the trans>
hey take some pictures of the inside of the bell please . And also check that the two bolts in the corners in the bottom didnt get missed , its strange you cant get it off send to info@performabuilt.comComment
-
Re: bellhousing off the trans>
I GOT EM!!!! whew after breaking 6 torx bits, yes 6!!!!!! i finally got em all off and the housing offComment
-
Re: bellhousing off the trans>
excellent to hear they can be a pain i know , :banana:Comment
-
Re: bellhousing off the trans>
yea i tried tourching, hammering, evrything, and FINALLY they let go.Originally posted by performabuilt.comComment
-
Re: bellhousing off the trans>
i didn't think the bellhousings came off of the transmissions that came on the 3.8lComment
Comment