Ring Gear Spacers - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Ring Gear Spacers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ring Gear Spacers

    Anyone here using one? I was given a Trans-Am rear end with a 2-series LSD and 2.73 gears. I was wanting to put 3.73's in it, but not have to go and buy a whole new posi unit. Did some searching and found these spacers. Summit has them for $30 for 2-series carriers just in case no one knew. Anyways, this would be all I needed to make my 3-series gears work in a 2-series carrier, right? Other than an install kit and all of course. Has anyone had any problem with them? TIA
    ~97 3.8L V6 Camaro~
    A few things

    Only Member of Team Hooker?!?

  • #2
    Re: Ring Gear Spacers

    do you already have the gears? cause they do have 3.73's for the 2-series. i'v seen the spacers on summit before and the description Motive gives seem that it will work, but I would give summit a call anyways

    Comment


    • #3
      Re: Ring Gear Spacers

      Well, what I was planning on doing, since I already have the rear-end was swap my 3.23's into there for right now. Then, once I get enough money for an install, a tune for the gears, and the gears (those are necessary believe it or not :P ) I'd switch them. Right now I'm kinda happy with my gearing, but want 3.73's. I know someone who'll swap them over for me, I just have to find a way to make them work in the 2-series carrier. I guess I'll go ahead and give it a try.
      ~97 3.8L V6 Camaro~
      A few things

      Only Member of Team Hooker?!?

      Comment


      • #4
        Re: Ring Gear Spacers

        whoa there, cheapo-cowboy...think this thru: if you just put spaces on the 2-series carrier to make 3 series gears fit, the ring bolts are only gonna have about half(and that's being generous) the thread actually in the ring gear. I mean, if you're cool romping on your new 3.73s with only half the ring-bolt thread, then by all means, go for it

        Comment


        • #5
          Re: Ring Gear Spacers

          Well, since they make 3.73's for the 2-series carrier, I'd probably pick up a set of them. But, right now I only have like $50ish to spend, and would like to get my posi put in, instead of it sitting there collecting dust. I figured, for $30 more I could go ahead and have my posi by swapping in my current 3.23's in my rear end. Then I'd buy the 3.73's abit later (like a month)
          ~97 3.8L V6 Camaro~
          A few things

          Only Member of Team Hooker?!?

          Comment


          • #6
            Re: Ring Gear Spacers

            Originally posted by RadRacer
            But, right now I only have like $50ish to spend, and would like to get my posi put in, instead of it sitting there collecting dust.
            Your posi isn't going to crumble to pieces if it sits for a bit. Take your time and set your rear axle up correctly the first time.

            Comment

            Latest Topics

            Collapse

            There are no results that meet this criteria.

            FORUM SPONSORS

            Collapse
            Working...
            X