Tweet
about how much would it cost to replace a clutch on a 94 camaro with a 3.4 V6 and a 5 speed?
-
-
Re: clutch
Probably around $350 for a shop to do it, and you supply the parts.sigpic -
Re: clutch
about how much for a shop to do the whole damn thing?Comment
-
Re: clutch
I had a shop tell me 700 to do the clutch
I had a shop tell me 2,000-2,500 for everything, slave, master, and clutch*Matt
Old people shouldnt use the internet.Comment
-
Re: clutch
thats about $1500-2000 to muchOriginally posted by StrtRacer98Comment
-
Re: clutch
That is crazy, are they doing a engine & tranny for that price.lolOriginally posted by StrtRacer98
The $700.00 sounds about right for a new clutch,slave, master and install.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: clutch
he forgot to add that he didnt get a reach around and a there was no KY
87 Firebird RIP
96 Camaro RS RIP
94 Patriot Red 1LE Z28 - Sold
02 WS6 TA - SoldComment
-
Re: clutch
i didnt pay to have that done, i did it myself!
was just trying to get an idea of how much i just saved.
thats a kick in the d!ck*Matt
Old people shouldnt use the internet.Comment
-
Re: clutch
Originally posted by ssms5411
where are you gonna find clutch, slave, master and flywheel ( which i forgot to mention ) for $700 ?
they would pretty much be doing the install for free
3-400 ish for the clutch alone
100 for the slave
master- i duno
flywheel- 100ish...*Matt
Old people shouldnt use the internet.Comment
-
Re: clutch
Clutch kits are only like 230 from autozone unless your getting an aftermarket clutch then its prolly gonna cost you 300 or 400. Flywheel u usually don't have to change maybe have it machined but thats not much at all. and slave cylinders like 60 bucks. I'd give full clutch rebuild 300 in parts if ur replacing it with stock. We just replaced a clutch in my buddies toyota truck i think it cost him 310 for all parts (clutch kit, slave cylinder)Comment
-
Re: clutch
master is around 80ish i belive, i dont remember exactly what i paid for mine. but you dont need a flywheel, just have it resurfaced.Originally posted by StrtRacer981998 bright red camaro ,M5 ,Y87 ,stock<br /><br />Originally posted by Rune:<br />If it smells like a turd and looks like a turd, chances are its probably not a candy bar.Comment
-
Re: clutch
Depending on the miles and if your going with a after market clutch I would go ahead and spend the extra $130 for a fly wheel , I think G.m book time is 4 hours for a clutch install and thats 85.00 hr, I think the master is around a hundred or a little over and slave is around $80.00, G.m clutch will be in the 300's , so might as well go with an aftermarket. It would put above $800 for parts and labor , but you could do it for less than 500 if you did it yourself.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: clutch
$130 for what? a stock steel one? i've never looked into that, just alum. one's and they're alot more than that.Originally posted by ssms54111998 bright red camaro ,M5 ,Y87 ,stock<br /><br />Originally posted by Rune:<br />If it smells like a turd and looks like a turd, chances are its probably not a candy bar.Comment
-
Re: clutch
Yes , that would be a stock one.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
Comment