abs not working after LSD was installed

[some_punk]

I bought a LSD off ebay, and i just finished installing it and now the ABS light is on. does this mean my abs isnt working?

[IDoVoodoo]

Re: abs not working after LSD was installed

did you re-intall the reluctor ring?

[crushedout]

Re: abs not working after LSD was installed

If the ABS Inop light is on it means you have brakes but they will lock up.

[vr4gasm]

Re: abs not working after LSD was installed

eh you don't need abs if you can drive... very overrated

[DAS BOOT]

Re: abs not working after LSD was installed

eh you don't need abs if can drive... very overrated

Its still nice....



did you install an ABS ring? Is your sensor unplugged or anything.

I have spare of both if you need them :)

[some_punk]

Re: abs not working after LSD was installed

WHat does the reluctor ring look like?

[IDoVoodoo]

Re: abs not working after LSD was installed

looks like a big ring w/ teeth that you should you have knocked off the old carrier and put on the new carrier before you installed the ring gear

[crushedout]

Re: abs not working after LSD was installed

Here ya go, mine is worn out but you can see where it is now

[DAS BOOT]

Re: abs not working after LSD was installed

If you need one I think I have one laying around will sell you for $15 shipped.

[some_punk]

Re: abs not working after LSD was installed

Thanks for all the help. I just got the ring off my old carrier and i will put it in when i swap out the drum brakes