i have a 1996 camaro 3.8 that had an automatic transmission in it i took my motor and transmission out of my old car and installed it but my transmission was a five speed and i cant get the car to start need help with the interior wiring
Announcement
Collapse
No announcement yet.
installing manual trans in automatic car but it wont star
Collapse
X
-
Re: installing manual trans in automatic car but it wont star
i cant figure out how to wiring in the nutral switch on the clutch pedal or bye pass it i got a little help just a little while ago with the wiring but that wiring wasnt in the new car its in the old car so should i just take the interior wire out of my old car and install it in the new car or do you have a nother idea
-
Re: installing manual trans in automatic car but it wont star
ok look at that picture in the other post i made.
Take a look at where your shifter was under the center console. There is a plug that was plugged into the shifter assembly for your auto. Unplug that, cut the plug off and then connect the wires like they are in the pictures i posted
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...4 weeks ago
Comment