differential Cover

[XgunsmokeX]

this might be the wrong board for this but, i got a 97 Y87 A4, so 3:42 limited slip. i want to change my diff cover to a better one like a alum. any one know if they make any for the fbodys

[josh98bird]

Re: differential Cover

ebay has plently... just wondering why you want another? I'm currently thinking about getting one that has a drain in it... after changing the gear lube, I'd really like to have a cover with a drain in it.

[FirebirdGT]

Re: differential Cover

http://www.taperformance.com/gm.htm What I have.


http://www.hawksthirdgenparts.com/in...OD&ProdID=1674

Gee, that was hard. :rolleyes:

.

[97rs4life]

Re: differential Cover

TA performance rear end girdle, the best that they make for our cars. Here is a link:

http://www.gvperformance.com/store/i...od&productId=7

Get the stud kit with it, it is under the 3.8l drivetrain section

[ssms5411]

Re: differential Cover

I think the TA girdles look the best overall.

[XgunsmokeX]

Re: differential Cover

yup thats what i was looking for thanks, now i get to see if the diff cover on my bird is the same as my blazer and order 2 of them

[cam98aro]

Re: differential Cover

its just a normal 10 bolt rear end, nothing special for fbodies

[XgunsmokeX]

Re: differential Cover

so ill take that as it will work?

[Den69RS96]

Re: differential Cover

Make sure you get the cover for the 7.5 inch 10 bolt not the 8.2 or 8.5. The 8.2 is an older rearend that was used in lo po first gen camaros etc. The second gen camaros had the 8.5 inch 10 bolt. I think gm went to the weaker 7.5 starting with the 3rd gen. Both Summit Racing and Jegs offer there own versions of the cover as does Moser, Strange Engineering, TA Performance.

[XgunsmokeX]

Re: differential Cover

http://www.gvperformance.com/store/i...od&productId=7

this on should work since it is for a LS1......right

[97rs4life]

Re: differential Cover

http://www.gvperformance.com/store/i...od&productId=7

this on should work since it is for a LS1......right

it is for both the v6 and v8 cars. They have the same rear end. ;) Get the stud kit with it for added support

[XgunsmokeX]

Re: differential Cover

planned on it, hope it fits my 01 blazer too

[97rs4life]

Re: differential Cover

planned on it, hope it fits my 01 blazer too

sale ends august 31 just to let ya know. It is around the corner

[Tom Rs]

Re: differential Cover

sale ends august 31 just to let ya know. It is around the corner

Pretty sly there...

[97rs4life]

Re: differential Cover

Pretty sly there...

sly? nope, just trying to save him some money instead of paying full price.