Tweet
how do i get the line seperated without using the tool mentioned in the haynes manual
-
96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHR -
Re: clutch line removal
You pretty much need the tool to remove it without damaging something, Or you could fabricate some sort of metal fork thing to wrap around the gold peice and remove.*Matt
Old people shouldnt use the internet. -
Re: clutch line removal
where do i get one96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHRComment
-
Re: clutch line removal
autozone. it's only a couple of bucks. well worth it.WAWA-A-HOLIC
Comment
-
Re: clutch line removal
neither auto zone or advance auto has this tool. I tried there yesterday and i called today.96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHRComment
-
Re: clutch line removal
See if they have a clutch kit for your car, open the package and take the tool out, tell them youll bring it right back or something.
My clutch kit came with one, and when i the slave cylinder it came with one as well.
So you could buy the slave cylinder open it, take the tool and return it.*Matt
Old people shouldnt use the internet.Comment
-
Re: clutch line removal
I'd send you one of mine, but i left it behind somewhere at my moms in florida when i did my clutch.*Matt
Old people shouldnt use the internet.Comment
-
Re: clutch line removal
This is what it looks like, maybe you could make one like i mentioned above, its just thin metal like 1/8" or so.*Matt
Old people shouldnt use the internet.Comment
-
Re: clutch line removal
I just snapped the slave cylinder off. I have a new slavecylinder going in so screw it. Thanks guys96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHRComment
-
Re: clutch line removal
Originally posted by Timmy
*Matt
Old people shouldnt use the internet.Comment
-
Re: clutch line removal
just use 2 flat head screw drivers, thats what i have done like 3 times
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual convertedComment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago -
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...4 weeks ago
Comment