i have traction control now and the rear-end that i might get does not have tc. is this going to cause a problem other than not have traction control any more. will it have any effects on the computer.
Announcement
Collapse
No announcement yet.
rear-end swap/traction control help
Collapse
X
-
Re: rear-end swap/traction control help
in addtion what would happen if you put a rear end with traction control on a car that doesnt have traction control? sorry to highjack haha
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted
-
Re: rear-end swap/traction control help
http://forum.camarov6.com/showthread...ight=3-channel
^Search exists for a reason. Use it before rehashing old, beaten questions
Comment
-
Re: rear-end swap/traction control help
I don't think TC came on V6's....but I could be wrong.
I went through a swap and had to match it up correctly otherwise I would oose ABS, so that's what could happen with the wrong rear.
1998 White Camaro 3800, A4, MagnaFlow Cat-Back, Zexel & 3.42's, Jet Chip Stage 2, Whisper Lid, and Ram Air.
Comment
-
Re: rear-end swap/traction control help
Originally posted by flyfrito_SSI don't think TC came on V6's....but I could be wrong.
I went through a swap and had to match it up correctly otherwise I would oose ABS, so that's what could happen with the wrong rear.
Comment
-
Re: rear-end swap/traction control help
not really. If you're planning on buying this rear axle, which is what your heart seems set on, just take the posi unit out and put it in your car. Also, with higher gears, you'll need to recalibrate your shift points if you're an auto, and you'll need to adjust the speedo regardless of tranny type.
Comment
Latest Topics
Collapse
Comment