Prothane master kit tranny mount question

[hpotter]

I have a 1994 3.4 camaro and just did the rear end swap with a 1994 camaro Z28 with disc brakes. I am going to be doing the poly bushings with prothanes master kit (part # 7-2009). I have heard that there is a problem with the tranny mount in that the trans will sit 1/2" lower causing vibration hence needing a spacer. Is this true? I have also heard that if you use a crossmember from a LT1 it is now a direct fit. Is this true? Thanks for any help.

[95PFB]

Re: Prothane master kit tranny mount question

i have heard something about using a spacer but not on the Lt1 cross member.

[IDoVoodoo]

Re: Prothane master kit tranny mount question

it's in the stickies up top :)

[hpotter]

Re: Prothane master kit tranny mount question

Yes, I just saw the sticky but was wondering if the prothane mount was the same size as the 1LE.

[IDoVoodoo]

Re: Prothane master kit tranny mount question

yup, that's posted in the sticky as well