Axle Replacement!!!! - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Axle Replacement!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Axle Replacement!!!!

    Ok Guys I think i broke my axle haha! i went to the track last night and then when i got home i took the rear wheels off to Switch rims and my driver side rim was covered with REAR END fluid and coming from the axle seal lol. so where can i buy a driver side Axle for my car and what one do i need . drove the car out today and the rear end is making noise now so help me out,

  • #2
    Re: Axle Replacement!!!!

    if you lost fluid don't drive it till its fixed.. your just going to make it worse
    2001 Camaro 3.8 A4
    1991 3000GT VR4
    2001 Mitsubishi Eclipse GS

    Comment


    • #3
      Re: Axle Replacement!!!!

      Indeed, you don't want to drive it if there's not enough fluid in there. Pull that axle out and take a look as soon as possible. It could turn out to be just a bad seal.
      -<i>Travis</i><br /><b>99 Trans Am, Pewter, A4</b> Forged, stalled, and cammed<br /><b>85 Buick Regal WH1 T-Type</b> It\'d be cool if it ran...<br /><b>94 Camaro 3.4, Teal, M5</b> The daily beater

      Comment


      • #4
        Re: Axle Replacement!!!!

        Originally posted by Skinny View Post
        Indeed, you don't want to drive it if there's not enough fluid in there. Pull that axle out and take a look as soon as possible. It could turn out to be just a bad seal.

        X2 for a bad seal, I wouldn't run the car until you take a look at it.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

        Comment


        • #5
          Re: Axle Replacement!!!!

          I doubt you actually BROKE the axle.

          I need new axles because my bearings were bad, and my wheelhop that came with the lowering springs and stiff shocks, pretty much finished them. There are gouges where the bearings are.

          So while you are in there, change the bearings too.. lol

          Comment

          Latest Topics

          Collapse

          There are no results that meet this criteria.

          FORUM SPONSORS

          Collapse
          Working...
          X