rear end swap soon

[MIKE1stcamv6]

im almost ready for my rear end swap from my 1999 stock open diff to a 2001 z28 lsd can i use the same 10 bolts? if not where can i get them i have the gasket from felpro looks pretty cheap i thinks its paper i know i need 75W90 gear oil and Limited slip additive.

[Skinny]

Re: rear end swap soon

You can reuse the ring gear bolts but it is best to replace them. You should be able to find new bolts with any basic "install kit." You might find them in a separate package at a parts store. Then there's always the dealership.

If you're using a Zexel Torsen carrier, then you do not need the additive.