3rd brake light works. main brake lights do not work

[Tyler]

looking through the wireing schematics...i see that my brake pedal switch works just fine since my third brake light (high center mounted) works just fine.. however, my two main brake lights in the back do not work.

Going back through the schematics, I see that my rear stop lights go through the turn/hazard switch assembly. My hazard switch works.. my turn signals work just fine, my wipers and high beams turn on just fine.. brake lights.. no go.

i've swapped out all new bulbs and sockets.. still same problem.

I don't have a haynes manual, can anyone give details on how to remove and install a new turn/hazard switch assembly?

[StrtRacer98]

Re: 3rd brake light works. main brake lights do not work

Wow, havent seen you post in what seems like a few years tyler.

What makes you think the turn signal / hazard switch is the cause of your problems?

Kind of sounds like a bad ground to me... Also, did you check the fuse?

[supreme_style21]

Re: 3rd brake light works. main brake lights do not work

http://tss.likeabigdog.com/

This is for w body cars, but the general procedure should be the same