Tweet
Last year when I changed over from the 4L60E to the T5 I ran into a problem where my speedo would not read. Well I have tried everything I can think of from replacing the VSS sensor to checking conductivity and grounds through every wire in the system that comes to mind and I still can not figure out how to fix my speedometer. It reads 0 all the time, the trip and odometer do not move either. I originally tested on the original 4737 PCM from my car ( 94 auto) with no result. I have now tested the system running on Megasquirt. the VSS reads accurately on its 4k ppm. I have the out put set to feel the speedo the same 4k ppm signal but still no movement. Are there any suggestions to why this may be happening?
- Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us. - If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Comment