When I crank up my kappas my speaker covers start to vibrate. How do I get rid of this?
Announcement
Collapse
No announcement yet.
speaker covers vibrating
Collapse
X
-
speaker covers vibrating
1993 3.4 <br />Borla rear section<br />3 inch Catco High Flow Cat<br />2.75 inch I pipe (Picked one up from an LT-1 guy for a whole $10)<br />K&N Fipk <br />180° T-stat<br />Jet Stage II<br />10 Spoke Z28 Wheels<br />NGK\'s, Taylor Spiros<br />Mobil 1 synthetic<p>Email Viper2@chesnet.net for 4th gen replacement parts.Tags: None
-
I put a piece of Black Elec. Tape behind the grill clips when the grill was removed and it took care of the problem. You can't see any of the tape showing on mine, but on my front grills, I put a dab of clear silicone around the edges of the grill while it was removed and let it dry. Works like a charm!
Marcsigpic
-
652.3i's. I am pretty sure that is what they are called. They are coaxial not component but still sound very nice. A huge improvement over the stock rear speakers.1993 3.4 <br />Borla rear section<br />3 inch Catco High Flow Cat<br />2.75 inch I pipe (Picked one up from an LT-1 guy for a whole $10)<br />K&N Fipk <br />180° T-stat<br />Jet Stage II<br />10 Spoke Z28 Wheels<br />NGK\'s, Taylor Spiros<br />Mobil 1 synthetic<p>Email Viper2@chesnet.net for 4th gen replacement parts.
Comment
-
This was actually a factory defect I found in a manual at the dealership I work at. They say to buy some felt-backed tape, remove the speaker covers and cut the tape into strips for the edges of the covers. It worked great for me. But the electrical tape or silicone should work fine also. They are picky at the shop, so we're not allowed to.Teal 94 Camaro 3.4 Liter<br />Transgo stage 3 shiftkit, Shift module, corvette servo, SLP cold air induction,3.42 ring and pinion, Heavy Duty Posi LSD, Flowmaster exhaust, NX, blackouts
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...3 weeks ago
Comment