Tweet
my turn signals left and right stop working today
i think i just have to get a new relay
does anyone here know whe this device is in the car ?
i think i just have to get a new relay
does anyone here know whe this device is in the car ?
-
headers, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
-
make sure the lights just didn't go out. When the lights burn out, the turn signals won't work either. It's happened to me on 3 occassions already.Eclipse 8443, CDT ES-620s in doors (Clarion APX401.2), IEK, CDT 6X in rear(HU), Image Dynamics ID10v.3D.4 in stealthbox(Clarion DPX1001.2)<br /><a href=\"http://www.sounddomain.com/id/larryfirebird33\" target=\"_blank\">http://www.sounddomain.com/id/larryfirebird33</a><br />borla cat-back, FTRA, whisper lid -
Would be a little odd that both left and right sides had burnt out bulbs.... though not impossile. ;) I had one burn out on me and by just looking at them, I could have swore they were all working.... opened it up and sure enough. One's blown.Originally posted by LARRYfireBIRD33:
make sure the lights just didn't go out. When the lights burn out, the turn signals won't work either.
Bad Bird, under the dash there are two blinker relays. One gets it's input from the turn signal switch and the other from your hazard switch. Turn on your hazards. Are the lights blinking? If so, you've found a bad relay. Under steering column, small silver cylinder. Few bucks from auto zone. If your lights still refuse to light, double check fuses maybe?Comment
-
Would be a little odd that both left and right sides had burnt out bulbs.... though not impossile. ;) I had one burn out on me and by just looking at them, I could have swore they were all working.... opened it up and sure enough. One's blown.Originally posted by 96firebird311:
</font><blockquote>quote:</font><hr />Originally posted by LARRYfireBIRD33:
make sure the lights just didn't go out. When the lights burn out, the turn signals won't work either.
Bad Bird, under the dash there are two blinker relays. One gets it's input from the turn signal switch and the other from your hazard switch. Turn on your hazards. Are the lights blinking? If so, you've found a bad relay. Under steering column, small silver cylinder. Few bucks from auto zone. If your lights still refuse to light, double check fuses maybe? </font>[/QUOTE]the hazard lights are working i think is the relayheaders, high flow cat, slp loudmouth
powerdyne supercharger 6psi
GT2 cam. all done by myself :banana:
Hell yea
Comment
-
i know what it is, i had the same prob., check ur grounds on the sub frame in the engion compartment, there will be 2 wires bolted down by each lamp96 camaro Y87~3.8 5 speed~75 shot zex nitrous~K&N~80\'s series flowmaster~yokahama tires~323 gears~5% tint all windows~bose sound~http://www.cardomain.com/ride/822994Comment
Comment