I will be hooking an Infinity 1020W model 10" subwoofer up to the stock HU with an RCA converter...
Sub specs are
Nominal Impedance: 4 ohms
Power Handling: 250WRMS/1000W Peak
Sensivity 2.83V/1m: 90dB
Frequency Response: 22Hz - 800 Hz
Mounting Depth: 5-1/2" (140mm)
Cut-out Diameter: 9-1/4" (235mm)
Power Handling RMS: 250W
Power Handling Peak: 1000W
Sensitivity: 90dB
Frequency Response (± 3dB): 22Hz - 800Hz
Mounting Depth: 5-1/2"
Impedance: 4 Ohms
It's going in a seal boxed, not that that would make a difference in amp choice. I'm looking for a pretty cheap amp that'll get the job done. If anything, just tell me what ratings the amp needs to be and I'll go from there.
Thank
Sub specs are
Nominal Impedance: 4 ohms
Power Handling: 250WRMS/1000W Peak
Sensivity 2.83V/1m: 90dB
Frequency Response: 22Hz - 800 Hz
Mounting Depth: 5-1/2" (140mm)
Cut-out Diameter: 9-1/4" (235mm)
Power Handling RMS: 250W
Power Handling Peak: 1000W
Sensitivity: 90dB
Frequency Response (± 3dB): 22Hz - 800Hz
Mounting Depth: 5-1/2"
Impedance: 4 Ohms
It's going in a seal boxed, not that that would make a difference in amp choice. I'm looking for a pretty cheap amp that'll get the job done. If anything, just tell me what ratings the amp needs to be and I'll go from there.
Thank
Comment