Tweet
Anyone use a spot other than behind the PCM to bring wires through the firewall? If so, where? What?
-
Robert - owner www.FirebirdV6.com/CamaroV6.com
"Mid-life crisis? I'm way beyond that!"
1996 Black Firebird GTxxxRam Air V6 w/ M5xxxwww.FirebirdGT.com
Raven -
On the drivers side, but the steering shaft.
Hard to see, but general area.
http://www.mikewillhiggs.com/gallery...ro/engine_bay/ -
Drill a hole on the driver side under the brake booster from inside, right behind the pedals.
Make sure you check, double check to make sure you dont drill thru the brake booster but you should be fine, i have a 1 inch hole there for my power wire and other wires for my alarm etc...*Matt
Old people shouldnt use the internet.Comment
-
i have one right around the steering column on the driver side.. i dont know where exactly it is in relation to the column.. i didnt do it someone did it for me.. but you can do one there1999 Black Pontiac Firebird <br />2 Rockford Fosgate P312D4 subs <br />Hifonics Brutus 1205d amp<br />Clear Sidemarkers<br />18\" Arelli Jovan Chrome WheelsComment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 day ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...3 days ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...2 weeks ago -
Hi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...3 weeks ago
Comment