Amp Questions

[Dennis]

I have two amps that I'm hooking up to my system, MTX 75x2 and MTX Thunder 302.

I would like to know all of the wires, connectors, etc I will need in order to install these amps. Here is what I have right now:

18ft 4 Gauge Power Wire Scosche
PHOENIX GOLD DISTRIBUTION BLOCK 24K
PHOENIX GOLD INLINE WAFER FUSE BLOCK 24K
Blue Turn-on wires
15ft 8 Gauge Power Wire
10ft 8 Gauge Ground Wire

I know I also need 2 sets of RCA's, but do I really need twisted RCA's or are any of these okay:

http://cgi.ebay.com/ebaymotors/ws/eB...71638596<br />
http://<br /> <a href="http://cgi.eb...5321</a><br />

Thanks

[Dennis]

Sorry about those links:

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1871638596
http://cgi.ebay.ca/ws/eBayISAPI.dll?...tem=1394445321

[96firebird311]

Ok.... your gonna need some way of connecting the 4g power wire to your battery. Scosche, Streetwires, Rockford..... the all make em'. You'll need two. One for the power wire, one for the ground. Which reminds me.... you'll need a short piece of 4g ground wire for under the hood. You might need some spade or ring connectors depending on what type you buy. I assume the distribution block gives you 2 8g outs? You might need some connectors there... unless it's the set screw type. You are using two amps, so I assume one will be powering your door speakers. You'll need some speaker wire to run to them! That's just about it.....

Also, twisted pair is the most important thing when buying RCA's. Doesn't mean you have to spend $50/ pair, but I would get twisted pair.

[ November 03, 2002: Message edited by: 96firebird311 ]</p>