Tweet
Where did everyone with 0 gauge wire bring it through to their amps. I can't seem to find a good way to get it into the car. I have tried for abour 2 hours wiggling it around some places and almost succeeded. Please post how you did it.
-
<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website -
i went through a grommet in the drivers side floorboard -
passengers side floor take off the plastic thing and you will see the hole near the front. pop your hood and look under your computer or take it out to see the other side of the hole.2005 Cavalier LS Sport M5<br /> <a href=\"http://members.cardomain.com/firefighter8615\" target=\"_blank\">http://members.cardomain.com/firefighter8615</a>Comment
-
routed mine under the car and up under the passanger side rear seat no lums under the carpet97 \'maro 3.8L with magana flow exhaust and K&N air filterComment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment