blinker help? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

blinker help?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • blinker help?

    ok guys heres my prob. 98 camaro- my left blinker wont work. the signal light comes on on the guages, and just stays lit. it didnt speed up the ndo this or anything, just did it. i changed the front bulb that was blown, and the back seems fine. i recently disconnected the DRL mudule behind the radio that controls daytime running lighta and auto. headlights... could this have sumthin to do with it? well i checked the fuse on the driver's side of the dash... on one side it looks kinda blackish, but the middle part is intack. i replaced it just to be sure and it still didnt work. someone plz help?
    thanx
    john
    1998 Silver T-Tops Camaro, 3.8 5 Speed<br />Mods: VFN Fiberglass Stingray Hood, Whisper Lid, Free ram air mod, 3\" I-Pipe to Flowmaster 80 to dual 3\" Hooker dual tips, 160 degree thermo...too much to list <a href=\"http://www.cardomain.com/memberpage/683461\" target=\"_blank\">http://www.cardomain.com/memberpage/683461</a>

  • #2
    Maybe you need a new signal flasher....autozone has them.
    <a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website

    Comment


    • #3
      there are 2 bulbs on each turn signal.. replace both of them!

      is your right turn signal still flashing? if so.. its probably not the flasher..

      I had a problem that sounds similar, buti cant really tell from your description..

      ~Bill

      [ July 08, 2003: Message edited by: AllTheGoodNamesAreGone ]</p>

      Comment

      Latest Topics

      Collapse

      • Dongrossmd
        Throttle Position Sensor trouble shooting
        by Dongrossmd
        I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
        2 weeks ago
      • ssms5411
        New stereo
        by ssms5411
        Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
        2 weeks ago

      FORUM SPONSORS

      Collapse
      Working...
      X