Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Here's a small sample of the first couple Milhouses I have mailed out. This one belongs to Spl-170s. I am please with the way the logos have turned out. :D I'm sure they will sound good when the subs are installed. I should have more pics up soon so you guys can sample some of the other logos that went out already. Let me know what you think ;) Note: The box with a single sub looks slightly different.
<blockquote>quote:</font><hr>Originally posted by ChameleonGreen: That's a damn good box. Kinda wish I hadn't spent $500 on my dual 12 stealths now...<hr></blockquote>
Megabass, do you have any pics of the passenger stealth box? Also, can it be covered in vinyl instead of carpet?
<a href=\"http://www.cardomain.com/id/byoonull\" target=\"_blank\">My Old Car - 2000 Silver V6 Bird</a><br /><br />The replacement-<br />94 Firebird Formula - 383, TH400, and a big blower<br /> <a href=\"http://community.webshots.com/user/fastblackcar94\" target=\"_blank\">http://community.webshots.com/user/fastblackcar94</a>
<blockquote>quote:</font><hr>Originally posted by Birdie2000: Megabass, do you have any pics of the passenger stealth box? Also, can it be covered in vinyl instead of carpet?<hr></blockquote>
Yes, I would be delighted to do vinyl. It would actually look better that way IMO because it will mimick the plastic panel. Sorry for no pics right now. But it fits very nice. Right at .70 cubic feet. Let me know and I can get one out to ya.
;)
THAT IS SO SWEET..... I KNEW IT WOULD LOOK BAD A$$ WITH A VINYL FACE BUT I WASN'T EXEPECTING THAT!!! [img]graemlins/omg.gif[/img]
Steve I mentioned in my e-mail that I would be sending you a picture for easier color matching... that "firechicken" box is the color! VERY nice work... I bet it will look even better once it's in my car mounted with my 12-w6... I feel like a kid in a candy store.
[img]graemlins/fluffy.gif[/img]
[ April 17, 2002: Message edited by: C.Palmer ]</p>
1994 Camaro 3.4L M5 R.I.P.<br />You know what they say- a small engine means big... errr... e/t\'s<br /><a href=\"http://www.pbase.com/rrj72/the_accident\" target=\"_blank\">www.pbase.com/rrj72/the_accident</a><p>replaced with: red 97 A4 vert (my brothers as soon as i find my REAL replacement)<p>soon to come: 1969 RS/SS<p>\"All you need are the esentials: scented candles, massage oil, and Berry White write that down.\" -Van Wilder
What's the price on the passenger stealth box in vinyl? Also, do you make a driver's side stealth box that is made out of mdf, or know where I could get one? (my MTX stealthbox is cheap frickin plastic)
<a href=\"http://www.cardomain.com/id/byoonull\" target=\"_blank\">My Old Car - 2000 Silver V6 Bird</a><br /><br />The replacement-<br />94 Firebird Formula - 383, TH400, and a big blower<br /> <a href=\"http://community.webshots.com/user/fastblackcar94\" target=\"_blank\">http://community.webshots.com/user/fastblackcar94</a>
I don't mess with the driver's side becuase it's way too complicated with wood. E-mail for all prices on pass stealths though.
Also, I can whip up a milhouse for dual 12s. And yes, there's plenty of room under the stealth for amps. The stealth basically sits on the ledge and doesn't go down any further. I can do them in all carpet or combination vinyl/carpet where the face that shows is vinyl and the rest is carpet to hold down the cost. I am pretty sure it will fit a 12W6 or anything smaller. Any other q's?
Just two about the Milhouse...and dude, please don't think I'm a dolt, but is there any chance that this type of setup could interfere with the trunk lid closing? And secondly, any chance you could come up w/ a package deal including the Milhouse and an amp rack? I'd be willing to ship you my amp for a custom job. (old man works for U.P.S. :D )
Well, I solved the hatch lid closing problem. I scratched the crap out of my deck lid trim, but I figured out how to make it work. First, I make the flap shorter than the stock flap. I also round the corners off a lot more. And lastly, if you pull those rubber stoppers out, the flap will lean back more. Problem solved.
And yeah, I could do a package deal. E-mail me with everything you are wanting.
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...
Has anyone used zzp gt1 cam if so is it worth the money and time
4 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment