questions about the stock stereo?

[blackbyrd]

i knwo the topic is kinda vague but have a lot of questions.

1. where is the amp taht comes with the monsoon 10 speaker system located.

2. what is the most power the stock components can handle excluding the 6" subs (now fosgates)

3. can the factory amp push after market speakers affectivly and safely.

this is what im dealing with xtant a4004 i think thats right and fosgates 6.5 subs the he versions that handle 300 whats max. im not sure whether i can do this but here goes. i would like to leave the subs on the factory amp (250wts a piece) then hook the xtant amp to the components in the front and rear. or shoud i just hook the subs and compnents to the xtant. i need help here guys i just got all ofthis stuff at a going out of business sale but have nto had time to do my research so im kinda of retarded when it comes to stereo. help me out thanks in advance

[Everglades W68]

Go to "search" while in this forum and type in "monsoon". I think you'll find waht you are looking for.

BTW, the monsoon speakers are very low ohms; the system is set up that way.

[blackbyrd]

ok i know where the amp is now but the other questons still need answering

[RSFireDog]

www.fbodyaudio.com

[96firebird311]

Visit www.ls1.com Click on the "electronics" forum. Read the first thread (in blue).

[blackbyrd]

ok after all my searching thanks guy s for pointing me in the right direction it seems to be it will be easier to completely ditch the monsoon amp and the rear speakers and hook the forchannel up to the subs and the front speakers from the head unit and possibly wait until aquiring a new head unit and saying the hell with the factory stuff all together. tell is this correct and or where is the best place for line level adapters? thanks for all the help guys