blinker problems - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

blinker problems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • blinker problems

    I have a 99 camaro, and the passengerside blinker does not light up. When i put that turn signal on the arow stayes lit and the rear one does not blink, it just stays on.
    I changed the bulb today, but it still will not light up. The fuse is also fine.
    What could it be?

  • #2
    Re: blinker problems

    you said "passenger" but you did not indicate if its the front or rear.... oh well

    realize there are 2 bulbs in the front turn signals... I cant remember about the rears.. (but I've changed the rears before)

    Your problem is either: you didnt change the Correct bulb
    OR you have a wire problem

    I am 99.9% sure you just didnt change the correct bulb
    Go to walmart, pick up 2 bulbs for $2 ... problem solved
    2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

    Comment


    • #3
      Re: blinker problems

      I just had the exact same problem on my 02 Z not less than a week ago. There are two lights in the front corner...bulbs- 3157 (turn light) and 194 (running light). The turn signal will stay on if the bulb is burnt but I replaced two bulbs before I figured out the socket was bad. Take the bulb out of the socket look to see if it looks burnt or smell it and you will know. If this is your problem dont go to Auto Zone, NAPA, etc cuz they didnt have anything close to the socket. I had to go to GM to get the socket. I have the part number if you need it. Retail is i think $54.00. Hope this helps.

      Comment


      • #4
        Re: blinker problems

        thats good info z06!

        my socket was burned alll to hell, but i just replaced the bullb and it was fine
        whatever... i dont really care if the socket was busted cause I'm an electrican and can figure out some way to fix it
        2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

        Comment


        • #5
          Re: blinker problems

          Originally posted by slow6
          thats good info z06!

          my socket was burned alll to hell, but i just replaced the bullb and it was fine
          whatever... i dont really care if the socket was busted cause I'm an electrican and can figure out some way to fix it

          Is that sarcasm?

          j/k My socket kept over heating the bulb so I had no other choice than to replace it, but figured I would share.

          Comment


          • #6
            Re: blinker problems

            Thanks for the info Z06; I will check the socket tomorrow.

            Comment


            • #7
              Re: blinker problems

              Checked today; the other bulb was burned out; changed it, and all works well
              Thanks everyone for your help.

              Comment


              • #8
                Re: blinker problems

                Originally posted by ZO6vette037
                I just had the exact same problem on my 02 Z not less than a week ago. There are two lights in the front corner...bulbs- 3157 (turn light) and 194 (running light). The turn signal will stay on if the bulb is burnt but I replaced two bulbs before I figured out the socket was bad. Take the bulb out of the socket look to see if it looks burnt or smell it and you will know. If this is your problem dont go to Auto Zone, NAPA, etc cuz they didnt have anything close to the socket. I had to go to GM to get the socket. I have the part number if you need it. Retail is i think $54.00. Hope this helps.
                ive got the same problem, but you can get the correct socket from advance auto parts, for $13.00 bucks(rear) & $47.99(front), chk their website, its a 2 day delivery
                1997 3.8 5-speed Camaro<br />BMR STB, LCA\'s, SFC\'s,Panhard bar, Torque arm,1LE sway bars<br />Headers, SLP cold air, Flowmaster catback, takeoff LSD, Eibach pro springs<br />Hurst shifter, 01 Z28 guage cluster w/ white face overlays, billet grill w

                Comment

                Latest Topics

                Collapse

                FORUM SPONSORS

                Collapse
                Working...
                X