New parts installed

[ssms5411]

So Meatyshells came over yesterday and installed my 65LB motron injectors and I did a quick flash on them and car started up fine but will have too dial in my A/F and fuel trims. Also installed my TR6 spark plugs and ZZP 10.3mm wires. Then got my old oil pan out and installed the new oil pan with my -10an oil retun line bung and new oil pick up tube (thought since we had it off, might as well install a new one. So I'm letting it dry and I need to put a end cap on the oil return bung then put my RP 20w50 oil in it and then start tuning the injectors. Then I hope in a few weeks install the piping and turbo to get it running, should be fun. Thanks again Ryan. You'll be the first one to run it with the turbo while I'll log everything.

[Blizzard242]

Re: New parts installed

Video that shiz!

[ssms5411]

Re: New parts installed

Video that shiz!

I will try, I hope in about 2 weeks to get it done, I'm doing the boost controller and methanol injection setup , so thats why it will take awhile, it will hurt my back I'm sure. But I am doing my brake calipers also in silver and taking my spare heads to the machine shop so they can match me up some Manely valves and maybe do them a little bigger than stock and another 3 angle valve job and have the guides milled down some ,so I will have pretty good clearance for the 1.7 Pro Mags.

[Mighty Thor]

Re: New parts installed

I can't wait to see end product of your project.

[ssms5411]

Re: New parts installed

I can't wait to see end product of your project.

Its been almost a year I think when I started to get parts and have stuff modded , like the A/C hose, oval piping and a bigger radiator. I hope this GT35R spins as quick as they say so I can get full boost by 3000 RPMS.

[flamingchicken]

Re: New parts installed

i thought you were all talk steve!! jk bud, glad you got it going.

just want you to know im holding my breath for those videos.

[ssms5411]

Re: New parts installed

i thought you were all talk steve!! jk bud, glad you got it going.

just want you to know im holding my breath for those videos.

If it wasn't for Meatyshells helping me , it would be alot longer to get it going, my back is totally out , i just watched Ryan yesterday trying not to bend my back or stand too long but just standing /sitting still put my back out, spent today in bed recovering. Still need to put oil in it and install a better tune I have been working on today for the 65LB injectors. Ryan's work is powered by my Dads homemade spicey chili. LOL

[Watazz]

Re: New parts installed

Nice! I caint wait to see finialized pics of this thing. Try n get a vid up, oh and did you keep those 90deg in the hot side?

[ssms5411]

Re: New parts installed

Nice! I caint wait to see finialized pics of this thing. Try n get a vid up, oh and did you keep those 90deg in the hot side?

I did for now, but i did buy 2 90 bend 3" oval tubes ($80) so if I have problems I can have them put in the 90 bends, so I will try it out first. All the tubing is 16ga. so its pretty stout.