Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I started the car last night to check the A/F ratio at startup and at idle and it hovered between 12 and 12.5, even I iknow thats rich.
I dont have access to HP Tuners right now to change the ratios. Can I gap the plugs smaller for less a spark to temporarily correct the problem?? Is there anything I can do in the meantime?
SLP CAI, RK Sport headers, P&Ped heads and intake, GT2 cam, Upgraded valvetrain, Z28 rear axle with 4.10s Tx Spd tune, Z06 rims, 2.5\" exhaust to flowmaster, 160* thermo, B&M ripper, upgraded ignition, rockford fosgate 12\" with sony xplode amp and HU.
depending on how much boost he is running, 11.5 will be way lean, i would stay around 10.5-11
You had your turbo on less than a month with no dyno #'s or track times , so I wouldn' t take advice from people who drive other cars, the people who actually drive their 3800 cars as DD is the ones I would listen too. I have had guys with Civic's try to give me advice, as if I would take their advice would be stupid since they know nothing about our engines and what it likes. Like the GTP's like autolite spark plugs rather than NGK's , its simple stuff like that , that will get your motor running its best and not blown up on the side of the road.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
To close this topic, I brought my car to my buddy with HP Tuners and turns out my ratios were just way to rich. We did about 20 passes and leaned all the parameters out to get my A/F ratio good throught the RPM range. No knock. Everything is good to go. Plugs are fine.
- Neal
SLP CAI, RK Sport headers, P&Ped heads and intake, GT2 cam, Upgraded valvetrain, Z28 rear axle with 4.10s Tx Spd tune, Z06 rims, 2.5\" exhaust to flowmaster, 160* thermo, B&M ripper, upgraded ignition, rockford fosgate 12\" with sony xplode amp and HU.
you are to rich...... lean it out, or shorten plug gap, but save some time and lean it out
10 AFR at full boost is usally fine but when the turbo is spooling it sometimes flood the air charge with to much much fuel and it feels like a misfire
also if you have a "autozone" ICM boost is VERY iffy on those..... ask shodown :)
To close this topic, I brought my car to my buddy with HP Tuners and turns out my ratios were just way to rich. We did about 20 passes and leaned all the parameters out to get my A/F ratio good throught the RPM range. No knock. Everything is good to go. Plugs are fine.
- Neal
I'll send you my Paypal address for my $500 tuning advice fee :omg:
:rock::p
i would still put TR6 in the car....... Tr55 = playing with fire
www.turbov6camaro.com 1997 3800 Series II Camaro 4600 Stall for my ride to the mall :chug: 7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod) 11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
Hi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...
Still trying to find oil leak on my Camaro, it’s a tough one. I think it is the oil pressure sender myself. Leaking when raving and going into boost....
1 week ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment