Tweet
so long story short I got the fuel rail adapter from metco motorsports, and it must have had a bad thread. Spun it on with my fingers + two turns of the wrench = F***ing leaking. Anyone ever have a similar problem?
-
-
Re: Metco rail adapter
Did you unscrew the pin inside of it and take it out of the fuel rail? Then use some paste or teflon tape on the threads so it help stops leaks. I have had my Autometer fuel sender and PSI gauge for almost 10 years with no problems.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine -
Re: Metco rail adapter
I cleaned up the threads used teflon tape and a thick oring inside the adapter. It seems to have stoped leaking.Comment
-
Re: Metco rail adapter
well Im afraid the fuel rail is going to need replacing.Comment
-
-
Re: Metco rail adapter
The part where the schraeder is pretty F***ed. I tapped it (7/16-20). got them to send me another adapter, so I will know if the rail needs replacing shortly.Comment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago -
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...4 weeks ago
-
Comment