Hex plug for PCV bypass?

[OneEightSeven]

Where are you guys getting these? No one around here seems to have them. I've got the 3/8-16 tap, rtv and a gasket, but no plug :(.

Also my injector duty is currently around 84-86% at 6200RPM @ WOT according to HPTuners. Will I be able to run a powerdyne 6psi setup on these injectors? Do I have to use the FMU? I plan to go with big injectors after my New York trip, but for now just to test I was considering using the FMU if I have to.

I'm trying to get all the prepwork done for the powerdyne install this weekend :D.

[MegaHertz]

Re: Hex plug for PCV bypass?

I would go with bigger injectors. I've heard some people say to not go much over %80 duty cycle and if you're there N/A you will definitely need more fuel with boost.

[OneEightSeven]

Re: Hex plug for PCV bypass?

I would go with bigger injectors. I've heard some people say to not go much over %80 duty cycle and if you're there N/A you will definitely need more fuel with boost.

Definitely getting bigger injectors. I'm just wondering if I can get by with the FMU for now. Will the injector duty go up much more since I'm going to be adding more PSI of fuel under boost condition?

[ssms5411]

Re: Hex plug for PCV bypass?

The plug you can go to like ACE hardware and they have just about every plug in the world, if your over 80% you should look into somemore injectors.

[OneEightSeven]

Re: Hex plug for PCV bypass?

The plug you can go to like ACE hardware and they have just about every plug in the world, if your over 80% you should look into somemore injectors.

I'll try ACE today, I think home depot just sucks. So you think the extra pressure from the FMU won't help with the stock injectors if I'm already at 86% N/A?

I wanted to try running the S/C on stock w/ FMU just to test the powerdyne out. I'm going to buy injectors sometime next week. Did you still want to buy that FMU once I'm done with it?

[techsan23]

Re: Hex plug for PCV bypass?

I got a plug kit from autozone that had about 4 different size plugs in it. I think it was made by spectre.

[OneEightSeven]

Re: Hex plug for PCV bypass?

I got a plug kit from autozone that had about 4 different size plugs in it. I think it was made by spectre.

May have to try autozone too. I usually only shop at Napa/Oreilly but may give Autozone a try, they're closer than my nearest ACE (which is half way accross town and closes at 5:30pm??!?) ****ing Houston!

[ssms5411]

Re: Hex plug for PCV bypass?

Yes, I might want the FMU.

[LoveMy02W68]

Re: Hex plug for PCV bypass?

I have a 6:1 BLOX FMU for my S/C. Highly recommended

[OneEightSeven]

Re: Hex plug for PCV bypass?

Yay I think I found the right hex bits. Time to see what we can do 0.o.

[LoveMy02W68]

Re: Hex plug for PCV bypass?

Good luck dude. WOAH just noticed your name was OneEightSeven o.O Creepy considering I have that on like everything I own

[OneEightSeven]

Re: Hex plug for PCV bypass?

PCV bypassed =), going to install the powerdyne tomorrow. Has anyone installed the Scorpion model powerdyne before in place of the belt driven unit? I was thinking of eventually just swapping out the head unit I bought with a Scorpion gear driven unit.

Good luck dude. WOAH just noticed your name was OneEightSeven o.O Creepy considering I have that on like everything I own

Heh, I've used this alias since like 2000 :), glad you approve.