My turbo build - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

My turbo build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • My turbo build

    So decided to make a thread for my turbo build, going in January 2022. The Turbo is a Garrett Gt35r with a T4,.63ar, Tial 38mm wastegate 10lb spring, Tial 50mm bov , eBay headers. Have -4an line for the oil feed line with .035 oil restrictor, -10an return line to the oil pan, 3” down pipe back to the rest of the 3” exhaust. Have plx wideband, shift glow fuel psi gauge, just got a mks digital vac/boost gauge , should be easier to read when driving. Also 2 Aeruoforce gauges and will be tuned by Hptuners.31”x12x 4” alm. Intercooler, 2 1/2” alm. pipping.Turbosmart boost controller.
    Last edited by ssms5411; 11-08-2021, 11:07 PM.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

  • #2
    When are you starting Steve?

    2002 SOM Z28 Camaro - 12.9 @ 104 mph
    1996 3800 Camaro - 13.43 @ 100.77 mph


    Project Cars | How To Guides | Scratch Repair | Synthetic Oil

    Comment


    • #3
      January coming up.
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

      Comment


      • #4
        Looking forward to seeing that, Steve.

        Comment


        • #5
          Me too, hopefully he doesn’t back out this time. I’m staying the weekend , plan is to drop it off Friday, work on it Saturday and Sunday and I’m going to have it towed after we’re done don’t really want to drive it 11 miles up the hill going from 2k DA to 5k DA . Really needs to be fine tuned. Plus I have 4 free tows with AAA. I’ll tune it once I’m up here.
          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
          96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

          Comment


          • #6
            Well I’ll see how it runs next Saturday, have a alignment appointment next Saturday should be over a hundred miles round trip. I think my transmission is on its way out sometimes when I go WOT the engine revs up but I don’t gain any speed. I’m lost on what to do.
            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
            96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

            Comment


            • #7
              Where are you from in Arizona, Steve?

              Comment


              • #8
                Originally posted by 2.8 Bird View Post
                Where are you from in Arizona, Steve?
                Yes, but don’t know how long. Checking out Colorado next year.
                08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                Comment


                • #9
                  I ask because I was in Arizona this weekend. I just got back last night. I was at William's on Saturday and Flagstaff on Saturday and Monday. I thought about you for some reason.

                  Comment


                  • #10
                    Cool you were pretty close to me. I’m in Yarnell, you probably drove through if you were on the 93 or 89. I’ll have to give you my contact info so next time you can stop by.
                    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                    Comment


                    • #11
                      Fixed some of my tunning problems , see if it makes it Saturday for the alignment. But still think my tranny is going out. Won’t get even close to redline, just revs about 4700-5100 rpm’s. Checked fluid it’s good.
                      Last edited by ssms5411; 11-17-2021, 07:48 PM.
                      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                      Comment


                      • #12
                        Found out my transmission problems was the tune ,put it back to stock settings and it’s fine. Always keep your stock tune,lol Going to make some little changes at a time. Got my alignment Saturday and drove not too bad.
                        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                        Comment


                        • #13
                          So the mechanic said January 15th and 16th. Going to drop everything off this weekend while dropping off X-Mas stuff. I’m starting off with a10lb spring. See how it runs. I still have tunning problems with the transmission but hopefully will figure it out by then. Engine wise it’s running strong.
                          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                          96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                          Comment


                          • #14
                            It’s still ago, 2 more weeks, can’t wait.
                            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                            96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                            Comment


                            • #15
                              Cool deal man! If he backs out again I'll drive the 6 hours to do the work

                              Comment

                              Latest Topics

                              Collapse

                              There are no results that meet this criteria.

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X