9 Lb Powerdyne Pulley -- Where?

[Infernal]

Where do I order it?

[Superv6bird]

I'm also looking for one. Can you just order it from powerdyne?

[Infernal]

Not that I can tell. I need to get ahold of one ASAP, too. Graah....

[Shirl]

Don't waste your time or money, honestly.. if you put the 9lb pulley on, the belt will slip so much that you will most likely see LESS yes LESS than 6 psi, even with the belt tightened like hell. Been there done that. I know of one person that was able to use the 9lb pulley and that claims it has worked, but in comparing ET's, they are the same or a little slower than someone who has the 6lb pulley. Here's another thing.. if you actually do get it to catch a little by adding some belt dressing (or some other technique), you will get a spray of oil from your dipstick canister or anywhere else the blowby can escape (like the manifolds) and there will a mess and possibly a new leak from a blown gasket. I actually saw 7 1/2 psi ONCE and then I saw SMOKE everywhere! I popped the hood and my detailed engine compartment was a mess along with my brand new headers. I definately recommend a breather system FIRST if anyone is going to try it.

[ September 14, 2002: Message edited by: Shirl ]</p>