speed limiter delete!!!

[mattsv6]

<blockquote>quote:</font><hr>Originally posted by hawgs:
Matt... you need to get your *** on the computer and order a damn plane ticket to H-Town [img]tongue.gif[/img]

Give me a call sometime tonight. :D <hr></blockquote>

ross i cant do it. i have 4 apartments that had hot water heaters go in this freezin *** weather and it is supposed too get colder. i have too work every night this week till at least midnight. all the apartments that i manage are on the 2nd floor or higher up so you no what happened when the heaters let go. water everywhere in the apartments below. i have 6 bathrooms and 4 closets too re-sheetrock/plaster/ and paint now. plus the carpets in the 2 clostes. i hate cold weather

:mad:

[mattsv6]

it works!!! i jsut had it out for a little bit and over 110mph. thing is perfect. ill work out the wiring diagram and get a total price. it should take about 2 hours install time cause you have too acess the tach wire and the split the vss signal wire in two, then connect too the wires from the computer. ill have a diagram up and working sometime tomorrow!!! [img]graemlins/thumbsup.gif[/img]

[AllTheGoodNamesAreGone]

impressive.. but there is no way in hell I would pay over $100 for something like that..

let alone around $200..

[ReodDai]

he said under $200. Not $200 or near $200.

[AllTheGoodNamesAreGone]

<blockquote>quote:</font><hr>Originally posted by ReodDai:
he said under $200. Not $200 or near $200.<hr></blockquote>

well.. that meens over 100.. or probably.. and i would not pay that either..

i would probably go for $75 or under.. no more though..

[Tiago]

noone said you had to get one. heh

[mrbako]

sign me up :D

[AllTheGoodNamesAreGone]

<blockquote>quote:</font><hr>Originally posted by Tiago:
noone said you had to get one. heh<hr></blockquote>


well.. I dont need one.. [img]smile.gif[/img]

i dunno.. for that kind of change you can probably talk one of those 2 places that acctualy do custom tunes for FWD 3.8's into doing it for you..

assuming you are obdII..

arnt obd1 cars alot easyer to get custom chips made up??

[97rs4life]

only up to 110? I thought the limiter kicked in at 118mph? Unless u got some different gears or something.

[Tiago]

3.4s limiter at 108


u should go to 150 just to make sure though [img]graemlins/naughty.gif[/img]

[mattsv6]

well i dont no for sure how fast i was going cause the speedo stops at 110. the car kept accelerating though. that was tapped out in 4th gear then shifting too fifth [img]graemlins/naughty.gif[/img]

5th gear= 2more psi,lol. was at 18psi all the way up till i got into fifth. then it stayed at 20psi. it was pimp. and i chirped fifth [img]tongue.gif[/img]

[ravenp]

you rock dude [img]graemlins/thumbsup.gif[/img]

[mattsv6]

;)

[Ian]

wait, why is it $200 again?

and sweet lord, you chirped 5th? ive been in 550hp mustangs with 2.73's that couldnt chirp 5th....how the hell did you do it?

[mattsv6]

it is a whole computer that moniters the motor by vehicle speed and rpm's. i am just providing the wiring harness. the older version is what i have and that was like 200 bucks or something. it is actually for other type's of cars but i wanted one and i made it work with some creative wiring. ill make a wiring diagram and post it on our site.

and my car chirps fifth somehow,lol. i dont no how but i think it might have something too do with the small apexi blow off valve not releasing all the compressed air. if i shift semi-fast the boost doesnt have time too escape the bov and i have immidiate full boost again. i have horrible compressor surge with this setup so i am going too run 2 different bov's in sequence too stop it. i have a feeling that i am going too do harm too my turbo's bearings if i keep doing this. lol