cam for a blower?

[PonyRunner96]

any one know of a good cam that can be used with a powerdyne unit? i have been talking to the guy from supersixmotorsports.com and they use a custom comp cam? please make it a supercharger cam..cuz the main difference between us and the grand national is the turbo cam..and well the turbo...any other thoughts welcome. thanx-dan

[3.4 slow to go]

you cain usually call up the major cam companies & see if they cain grind one up for you. Just be certain to have all your specs readily available, cr ratio, head runner #'s, rear gears, tranny gears, etc

[PonyRunner96]

true thanx alot brother..cuz like i said i talked to sueprsixmotor sports..tom yentzer he said they have two types "custom though" any opinions on that..
thanx again

[99v6cam]

yeah, just call up or email comp cams or something and the will custom grind you whatever you're looking for. If I remember correctly boosted motors love cams with lots of overlap. Fill us in on how it goes [img]smile.gif[/img]

[Nachius]

In general for a supercharger cam.

Split duration favoring exhaust.
Wide Lobe Separation angle.
Lifts you probably want above .500 at a 1.6 rocker
and 2-4* of advance which would be controlled by your Intake Centerline.

Quick Example(not an exact cam)
210/220 .507/.512 115LSA 111IC

[PonyRunner96]

hell ya thanks guys. ill print this post up to use as reference.by the way does anyone know what type of horsepower to expect from a 3.8 liter supercharged 6 psi..full straight piped headers back..a cam and ported and polished heads and a dyno tune.

[98Silver6]

u will have to find that one on your own, since u have all the mods it might be 300+. Only dyno would tell the exact #'s