THIS IS IT. IF YOU ARE A BETA TESTER, IT IS TIME TO PAY YOUR BALANCE.

[BATMAN]

Remember, you are a beta tester. You DID NOT get this kit because you wanted to be one of the first. INSTEAD, you got it to show that this kit will work, is solid, and will do what it supposed to do. You are a BETA TESTER. You are the next step. What we are looking for is

1)SAFETY- Your car and the kit must run safely without incedent directly caused by the kit.

2)GAINS- You should see the same gains i did (90-100% efficiency and about 100-130HP with 8psi). Remember this kit is adding to YOUR baseline. If you have a stronger car than me (which d@mn anyone should) You should see much much higher RWHP and RWTQ than i did.

3)FEEDBACK- You must report back to us and keep in contact with us by phone or e-mail of progress and status.


SO here is the list of current BETA TESTERS. I need the following people to call me (if you are a tester and not on the list, please call me or e-mail me ASAP) :

Michael Huff
Richard Work
Chris Reedy
Chris Burke
Chris Weiss
Joseph Zantelli
Steven Presley
Robert Cornell

If i have spelled your names incorrectly, please forgive me. I had a list of names and numbers and i failed to copy it from my computer at work when i lost my job. Actually i asked someone to burn it to cd, and they didn't copy the right folder :(

Anyways here is my number: 586-855-3378
and my e-mail(s): rcheria@hotmail.com or v6batmobile@yahoo.com

If you get my voicemail or if you are e-mailing me, please leave:

Name:

Phone number:

Time to reach you at the above number:

Meathod you plan to pay (Cert Check, Money Order, Credit Card, or suitcase full of cash [img]tongue.gif[/img] )

What PSI kit you want.

Note: For those of you who do not want PCM tuning, i believe the 8psi is going to be it. Those who want the 8psi have to get there kits now. PLease contact Bill or if you can't reach him, call me and i will put you in touch with him and please be ready to make arrangements for payment. The 8psi kit is ready. Remember if you do not pay for the kit, you will loose your deposit. For those who want the 10psi kit, Remember, you will have to get the pcm tuning and the bigger injectors.

For those who want the 8psi kit without tuning, the balance is 3845.00.

For those who want the 10psi kit, your balance is 3845.00 + 500.00 for the tuning + 150.00 for the injectors.

Bill, if i have stated anything incorrectly, please post corrections.

Thank You.

[ July 02, 2003: Message edited by: BATMAN ]</p>

[Tyler]

i hope they all follow through and get their payments in [img]graemlins/thumbsup.gif[/img]

[2000fbodyV6]

I can not wait until this comes out. I am definitly going to get one. Hopefully the beta testers pay. When will the kit be ready for the masses?

[FirebirdGT]

<blockquote>quote:</font><hr>Originally posted by 2000fbodyV6:
I can not wait until this comes out. I am definitly going to get one. Hopefully the beta testers pay. When will the kit be ready for the masses?<hr></blockquote>

There is at least one Beta Spot available - mine. $300 to me, and the rest to Bill and you can have the kit NOW! E-mail me if you want to discuss further.

[RedAudiomobile]

<blockquote>quote:</font><hr>Originally posted by BATMAN:

For those who want the 10psi kit, your balance is 3845.00 + 500.00 for the tuning + 150.00 for the injectors.

<hr></blockquote>

I thought it was:

$400 for 1996-1999
$500 for 2000 up

I am getting this info from this thread

http://www.camarov6.com/cgi-bin/ulti...=4&t=000449&p=

[BATMAN]

<blockquote>quote:</font><hr>Originally posted by RedAudiomobile:


I thought it was:

$400 for 1996-1999
$500 for 2000 up

I am getting this info from this thread

http://www.camarov6.com/cgi-bin/ulti...=4&t=000449&p=<hr></blockquote>

That still holds true. Sorry about that. Yes its 400 for those years.

[2000fbodyV6]

That is tempting but i still have a few more mods to complete before the supercharger.

[RedAudiomobile]

BATMAN, I emailed you asking where and who the payment is to be made to? I emailed you at the v6batmobile addy. Let me know what is going on?

[SLOWBRAEATER]

couldnt people save money by buying some ls1 injectors? alot of people sell them for 75.00 and up

[MachPerformance]

<blockquote>quote:</font><hr>Originally posted by SLOWBRAEATER:
couldnt people save money by buying some ls1 injectors? alot of people sell them for 75.00 and up<hr></blockquote>


The injectors we will be selling for the upgrade are 36#

[RedAudiomobile]

<blockquote>quote:</font><hr>Originally posted by BATMAN:

For those who want the 10psi kit, your balance is 3845.00 + 500.00($400 for pre-2000) for the tuning + 150.00 for the injectors.
<hr></blockquote>

I just got the invoice faxed to me today. For some reason there was $80 charge for the 10psi pully. I was also charged $500 for tunning, when it should have been $400. There is also an $85 shipping charge.

I tried to call the shop, to get this fixed but no one picked up.

[StockV6Cam]

<blockquote>quote:</font><hr>Originally posted by MachPerformance:



The injectors we will be selling for the upgrade are 36#<hr></blockquote>

The Grand Prix GTP's use a 36# injector that most of those guys sell for 50 bucks. I got a set of 36 pounders for that price at least :D

[MachPerformance]

<blockquote>quote:</font><hr>Originally posted by RedAudiomobile:


I just got the invoice faxed to me today. For some reason there was $80 charge for the 10psi pully. I was also charged $500 for tunning, when it should have been $400. There is also an $85 shipping charge.

I tried to call the shop, to get this fixed but no one picked up.<hr></blockquote>


Sorry for the mix up. I thought your car was a 2000+. Then your cal would be $400.00. When speaking with your dad, I was under the impression that you guys wanted the 10 psi pulley along with the 8 psi pulley, that's why there was a separate charge for the pulley. Standard shipping charges apply to all S/C kits. It's a 100 lbs box that we split into two packages with shipping insurance. Please talk with your dad and see if you want just the 10 psi pulley or both of them. He said to me that he wanted to start out at the lower psi and then work his way up to the 10 psi. Let me know and Colleen can make the adjustment and refax the invoice.

[99CamaroBullet]

Sent Bill payment for entire kit earlier, hopefully he will receive it very shortly. 10-15 days after he receives it, the kit should be there for me to pickup. I believe we are shooting for the 31st for me to have everything. Bill is also installing my Rk Sport headers to make sure I don't have the same problems as Ryan. One week for install, and I will pull a dyno run....and we will have 2 cars supercharged on the same kit finally.
Bill thought my car's engine Stock for Stock was stronger than Ryan's....so hopefully some decent numbers to follow. Keep you all updated when things get moving on install in a few weeks.

[RedAudiomobile]

<blockquote>quote:</font><hr>Originally posted by MachPerformance:

Sorry for the mix up. I thought your car was a 2000+. Then your cal would be $400.00. When speaking with your dad, I was under the impression that you guys wanted the 10 psi pulley along with the 8 psi pulley, that's why there was a separate charge for the pulley. Standard shipping charges apply to all S/C kits. It's a 100 lbs box that we split into two packages with shipping insurance. Please talk with your dad and see if you want just the 10 psi pulley or both of them. He said to me that he wanted to start out at the lower psi and then work his way up to the 10 psi. Let me know and Colleen can make the adjustment and refax the invoice.<hr></blockquote>


No, we are definatly going with the 10 PSI pully right off the bat. If we do decide to drop down(no chance), we will buy it later. The shipping charge sounds fair, just making sure that was the standard fee.

So resend the invoice to the same fax number without the 8 PSI pully, and 400 for the PCM tunning. Thanks. [img]graemlins/fluffy.gif[/img]

<blockquote>quote:</font><hr>Originally posted by 99CamaroBullet:
Sent Bill payment for entire kit earlier, hopefully he will receive it very shortly. 10-15 days after he receives it, the kit should be there for me to pickup. I believe we are shooting for the 31st for me to have everything. Bill is also installing my Rk Sport headers to make sure I don't have the same problems as Ryan. One week for install, and I will pull a dyno run....and we will have 2 cars supercharged on the same kit finally.
Bill thought my car's engine Stock for Stock was stronger than Ryan's....so hopefully some decent numbers to follow. Keep you all updated when things get moving on install in a few weeks.<hr></blockquote>


Hopefully 3 by then
[img]graemlins/thumbsup.gif[/img]