Turbo kit initial release

[Tiago]

I will start collecting names for the first kits soon, then when we are ready to start fabrication we will collect money, I think we still need about a month to be ready for the production stage.

[Forgotten]

still about about angled TBs on 3.8s? how can u fabricate our piping w/o a prototype of one?

[mattsv6]

like it was stated before. the kits are made for each individual car. if your car has the angled tb on it, there will be a design just for it. these kits will be very professional looking and will have a long lifespan. we have put countless hours into figuring out all the parts and fabrication for a while now and that is why it has taken a little while to get them out too the public. well worth the wait if you ask me [img]graemlins/thumbsup.gif[/img]

[IThinkImFast]

are you guys going to be making these kits a year or so down the road so i can get once next summer or hte summer after?

[Pig General]

Ok, Crazy question, how well would this kit respond to my car, high milage and no mods? If mods are required, which ones. I saw the dyno video, and that sold me that I definitly will get this, and that I need to start puttin money away.

[Tiago]

you wont need anythign that wont be available with the kit. The mileaege of the engine doesn't matter, if it runs good still, its fine. I know of a higher mileage 3.4 which is running just fine under boost.

[Swift_3800_F-Body]

Will i need to do anything extra, say larger fuel injectors if i wish to go higher than 9 psi?

[Swift_3800_F-Body]

yea i hope you guys make the kits for a while because this summer is looking bleak for me, jobs are ****, i wont be able to get $3500 until december maybe in jan 04

[SlimJim1284]

where would the intercooler go on a firebird?? there is no grill like camaros

[Speed]

I'll be producing this kit as long as there is a demand for it. For the questions about injector sizing, we ran 14 psi into Radcats car with stock injectors.

[MrCoffee]

computer tuning may not be necessary, but what if we wanted to get it. What things should we fiddle with as far as the PCM is conserned? Of course raise rev and shift points, and maybe spark advance for higher octane. What other things would you all suggest?

[Tiago]

I would suggest programming the fuel curve with at least a 2 bar map and big injectors for optimum performance and reprogramming the spark curve to better fit a boosted app. Those are the main things IMO about programming for the turbo.

[MrCoffee]

yea thats what I figured, but I figured I'd go ahead and ask. So thanks for your assistance with that Tiago. I dont exactly know what a 2 bar fuel map is but I'm sure the guy reprogramming the PCM will know. Thanks again

[fred slawson]

Okay for the $64 question. Who would you go to for the tune?

[MrCoffee]

remember its not completely necessary to have the tuning done. I was just being curious with my question. zzp does custom tunes though