PCM tuning for forced induction - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

PCM tuning for forced induction

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PCM tuning for forced induction

    First off I am not asking who CAN do this. I would like to know who has gotten tuning from where, for how much, and if you are happy with the tuning. Especially would like to hear from the supercharger crowd.

    I am asking this because I got tuning from a company, and am happy with some parts, but am annoyed with others and I'm certain I paid too much. I won't mention names until situation is resolved good or bad.

  • #2
    Billy has a point -- trust no one. [img]smile.gif[/img]

    Mail order tunes are very good for some people, and not for others. FWIW, your problems may be unrelated to the tune.
    <b>97 Camaro 3.8L M5</b><br />Car for sale<a href=\"http://terpmotors.com\" target=\"_blank\">terpmotors.com</a> Terrapin Motorsports! UMCP

    Comment


    • #3
      im here.... still happy.. with my ECU tuning..

      [img]smile.gif[/img] hmm

      mail order.. was not perfect..

      but.. i could use maf translator..with fmu..

      relative A/F ratio...

      so now. its ok~

      hmm.. i think.. before. you tune your car..

      research..every thing.. what will be going. on..

      so you can chose.. right way

      hmm.. i think.. some annoyed things's case..

      just forget it.. if your car is ok~ [img]smile.gif[/img]

      it will be good your mental health..
      1997 firebird convertable.<br />intense 8.5:1 forged piston,rods,slp1.8 rockerarm<br />255welbro,28injectors,MAF,CIA headers,magnaflow exhaust,intercooled powerdyne S/C,TAXAS racing ECU tuning,coni shock with spring,roll bar,etc~

      Comment


      • #4
        hey woojong where in korea are you? I should be headed back over there in about four months.

        I will be buying hp tuners. . . I had a feeling I should have done that from the start.

        Comment


        • #5
          good choice. the tuners are deffinately the way to go.
          2001 Arctic White Firebird With Black Drop Top<br /><br />3:42 Gears<br />Zexel LSD<br />BMR upper A-Arms<br />Trans Am exhaust with 3\" I-pipe and cutout<br />Modified intake<br />Mecham Hood<br />Trans Go shift kit<br />Making rear control arms and panhard

          Comment


          • #6
            im in ik-san, jeonrabukdo... hehet~

            its far from seoul... 2hours 30minute..by car..

            where will you go? for trip? or for bussiness?

            [img]smile.gif[/img]

            i also.. try to use hp tuner.. [img]smile.gif[/img]

            my next mod.. hehet~
            1997 firebird convertable.<br />intense 8.5:1 forged piston,rods,slp1.8 rockerarm<br />255welbro,28injectors,MAF,CIA headers,magnaflow exhaust,intercooled powerdyne S/C,TAXAS racing ECU tuning,coni shock with spring,roll bar,etc~

            Comment


            • #7
              I'm in the Army. I should be stationed at Camp Red Cloud again. Too bad I won't be able to bring my car.

              Comment


              • #8
                order HPT or DHP, then find a dyno that has people that know what they are doing only real true to do it right
                www.turbov6camaro.com
                1997 3800 Series II Camaro
                4600 Stall for my ride to the mall :chug:
                7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                Comment

                Latest Topics

                Collapse

                There are no results that meet this criteria.

                FORUM SPONSORS

                Collapse
                Working...
                X