95-97 3.8 Supercharger!!!

[cboney2000]

Don't know who has found this other than me, but its at tbyrnemotorsports.com:

1995-'97 3.8 V6 Supercharger 6lb. Polished Kit

Superchargers are a safe, effective and reliable way to get big horsepower and torque gains from your Camaro. While they may perform the same general function, not all superchargers are the same. Unlike the competition, who rely on planetary bearing or noisy gear drives, the Powerdyne unit utilizes an ultra strong, internal cog belt to drive the impeller. The key to the impressive horsepower gains is the curved-vane impeller. this design is similar to impellers used on high output turbochargers except it allows boost pressure to arrive as low as 1800 RPM, and build all the way to redline. The Powerdyne system reduces typical supercharger whine greatly producing the perfect "sleeper" Camaro. There are no oil lines to tap into the oil pan, or external pumps and coolers. Everything necessary for an easy installation is supplied including all brackets, mounting hardware and detailed instructions.

Price: $3719.99

Anyone know something about this??

[SuprSpdDB7]

yeah, mucho dinero! if i had that money i would have gotten a V8 when i bought my car ;)
it's a lot of $$$ if there is any one who know's where u can get one cheaper please post to the group! i'm sure alot of us can use a supercharge now and then

[AZ3.8Camaro]

That supercharger kinda sucks. The belt slips etc. and its very expensive. Batman and TealV6 are working on a new one featuring the procharger P600B, you can get them for under $1000 or so, and they are making the kit to install it, hopefully cheap and hopefully soon!

[knowledgefreak]

<blockquote>quote:</font><hr>Originally posted by AZ3.8Camaro:
That supercharger kinda sucks. The belt slips etc. and its very expensive. Batman and TealV6 are working on a new one featuring the procharger P600B, you can get them for under $1000 or so, and they are making the kit to install it, hopefully cheap and hopefully soon!<hr></blockquote>

It does not suck, you have never had one and no experience with one. The belt does not run on a belt with grooves so yes that is a flaw and would be better but does not mean that it sucks lol =)

cboney 2000 welcome to the internet =) That blower setup has been available for a while.

You can have any good race shop put a blower on your car. You could go buy an ati blower tomorrow and have what batman is working on finished in a week or two. ANY qualified shop can make that happen. ATI will not have that package out for a very long time. If the guys here pull it off they of course can offer their kit design to you with the use at your own risk warning.

building a mounting kit is really not rocket science here. A shop here in town put a turbo on a 3.4 maroon camaro. It ran 11's They sold it to someone.

So just because a manufacture kit is not out there in a pretty box with instructions for you does not mean that you have to wait for one to be made, just keep that in mind guys.

[imported_admin]

<blockquote>quote:</font><hr>Originally posted by AZ3.8Camaro:
featuring the procharger P600B, you can get them for under $1000 or so, and they are making the kit to install it, hopefully cheap and hopefully soon!<hr></blockquote>

Under $1000? Maybe for a used head unit with very high mileage... the Procharger 2.0 Kit will run about $3,500 to $4,000, same as any other ATI P600B kit.

I thought we were going P series or D series though?