Thoughts on this turbo for my setup?

[Loochy88]

im thinking about picking up this model for my front mount setup, is there anything im missing. let me know what you guys think...

BRAND NEW SUPER FLOW T3/T4 T04E TURBOCHARGER STAGE III WHEEL

.63 A/R COLD
.58 5 BOLT STANDARD HOT SIDE
3"INLET DIAMENTER
2"OUTLET

.57 COMPRESSOR WHEEL TRIM
.60 A/R COMPRESSOR
.63 A/R TURBINE
57 TRIM

TURBINE WHEEL:

EXDUCER:2.48"
MAYOR:2.89"

COMPRESSOR WHEEL

EXDUCER: 2.07"
MAYOR:2.36"

25-35 PSI PEAK POWER PERFORMANCE OUTPUT CAPABILITY

CNC MACHINED FLANGES

HIGH QUALITY T04E, WITH FORGED TURBINE PROPELLER WHEEL
EVERY INDIVIDUAL TURBO COMES WITH ITS OWN SERIAL NUMBER

[CM boyd]

That should work extremely well. Are you going to keep your NOS setup too?

[Loochy88]

ill keep the nitrous

[asdf1234]

Practically the same turbo I'm using. It'll work great [img]smile.gif[/img]

[CM boyd]

You should be able to run a small shot along with the boost. Just HAVE to get the fuel system the proper upgrades. DO NOT DO THEM BOTH BEFORE YOU GET THE UPGRADES!!!!!

[Loochy88]

dont worry, i dont plan on it.

on a side note, im a little iffy on buying it. its an ebay turbo... and even though its not the dreaded ssautochrome turbo, it still makes me nervous.

I'm now debating whether or not to go with a different unit. Ive found a nice genuine garrett with a .60 compressor side .84 turbine, and thats looking pretty nice.

theres a few others im still looking at...

[ September 28, 2005, 01:25 AM: Message edited by: Loochy88 ]

[T-Punk]

I'm guessing you are planning on an intercooler, so since you have nitrous you might as well use your purge for a spray bar to cool the intercooler down.

[CM boyd]

You can get rebuilt units for as low as $300 bucks that come with a one year warranty. Check out www.turbocalculator.com or East Coast Turbo.

[Loochy88]

east coast turbo's website doesnt really seem to have any turbo that fits those specs in my budget. turbo calculator has some cheap ones, but theyre really tiny. they have a t3 in the .4's but thats just too small.