Who wants to make $20?

[HAZ-Matt]

I can tell you that their last value is supposed to be 511 g/s [img]smile.gif[/img]

[malice10985]

97rs4life-

I saw your post on ls1tech.com.

[img]tongue.gif[/img]

I hope he doesn't post the table publicly... for your sake.....(evil laughs ensue)

[malice10985]

Originally posted by HAZ-Matt:
I can tell you that their last value is supposed to be 511 g/s [img]smile.gif[/img]

right now my last value is 439g/s

[HAZ-Matt]

I can't find an actual table. I'd just post on cz28 or lt1tech and ask for a stock table.

[RGB]

http://64.233.167.104/search?q=cache...AF+11216&hl=en

[malice10985]

DHP posted an accurate one on their forum. Sorry guys, but I get to keep my 20 bucks.

[Turbo Kyle]

Can I get a link to this A1R?

[AllTheGoodNamesAreGone]

[img]graemlins/rofl.gif[/img]

[RGB]

Originally posted by malice10985:
DHP posted an accurate one on their forum. Sorry guys, but I get to keep my 20 bucks.

You post post up good forced induction results (and any downside) with the LT1 MAF and L67 36# injectors and you'll save me (and others) way more than 20 bucks.

[malice10985]

Ok, but it will be a few days. DHP is working pretty hard to fix my stuff, so it won't be ready for about2 days. Then I have to go out and test the new programms.

[RGB]

Looks like I posted a link to a 3.5" (f-body) LT1 MAF table. You posted your's is 3" (buick roadmaster LT1?) so both tables (the one I linked to and the DHP one) should be wrong for your MAF. If you have the right table for the 3" please post it .

[malice10985]

DHP support forum

In the second post of this thread, there is an attachment. look at the stuff enclosed in it.

It is the modifications the owner of DHP made to the PCM of his 500hp 04 turbo GTP. The info in there is by no means correct for your specific car, but It can provide some stepping stones in the right direction.