Tweet
Im trying to find the best intercoolers for the money for a twin turbo setup. i was thinking a 1G dsm and a 2G in the front corners like the Procharger twin intercooler setup. I just need to know how well these guys cool the air down if they have like a t25 turbo going to them. I am planning on making some wire mesh guards for them to help protect them from rocks and the such since they arent bar and plate. any help would be nice.
-
2001 Arctic White Firebird With Black Drop Top<br /><br />3:42 Gears<br />Zexel LSD<br />BMR upper A-Arms<br />Trans Am exhaust with 3\" I-pipe and cutout<br />Modified intake<br />Mecham Hood<br />Trans Go shift kit<br />Making rear control arms and panhard -
They get pretty heat soaked at and above 13psi. I have a friend that said he was getting up to around 150* intake air temps at 13psi. Not very effiecent IMO but they are easy to find and cheap. -
im wanting to use one for each turbo which will only put out a max of 7psi each, would they be good for this app or are they really just that inefficient. and yeah they are both cheap and easy to find, thats why im lookin into them. thanks for the info so far.2001 Arctic White Firebird With Black Drop Top<br /><br />3:42 Gears<br />Zexel LSD<br />BMR upper A-Arms<br />Trans Am exhaust with 3\" I-pipe and cutout<br />Modified intake<br />Mecham Hood<br />Trans Go shift kit<br />Making rear control arms and panhardComment
-
You should be fine then. [img]graemlins/rock.gif[/img]Comment
-
awesome, thanks for the help.2001 Arctic White Firebird With Black Drop Top<br /><br />3:42 Gears<br />Zexel LSD<br />BMR upper A-Arms<br />Trans Am exhaust with 3\" I-pipe and cutout<br />Modified intake<br />Mecham Hood<br />Trans Go shift kit<br />Making rear control arms and panhardComment
Comment