adapting a powerdyne to a 98+

[iGoRa]

Im sorry to hear that..
air bags : http://www.ls1tech.com/forums/showthread.php?t=451795

[ February 15, 2006, 04:14 PM: Message edited by: iGoRa ]

[grayman]

for what it's worth,
the oil pressure sender elbow should be a 45 degree brass elbow. It should be male on one end and female on the other. the size on both ends is 3/8 NPT. Look in the NPT bins at a good auto parts store.

remember to use teflon thread tape on both ends of the fitting when installed.

if in doubt take the oil pressure sender with you to the parts store for fitting. you won't lose any ail by removing it. well...maybe 2 drops.

[dmw319]

thanks guys