finished installation...car running like crap - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

finished installation...car running like crap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: finished installation...car running like crap

    awe... look at the smile and smirk on his face....


    Horsepower is how fast you hit the Minivan... Torque is how far you take the Minivan with you... :wavey:

    Originally posted by Firehawk N Wv
    Mine were rusted also and the I had to cut my nuts off .

    Comment


    • #17
      Re: finished installation...car running like crap

      I hope you pluged the TB, put a breather on the oil cap, and did your spark plugs to TR6's or something similar. Good luck with it.
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

      Comment


      • #18
        Re: finished installation...car running like crap

        yep, did all that good stuff haha. plugged her on up, breather on the cap, and TR6's for my spark.

        1999 Firebird Y87/W68

        Comment


        • #19
          Re: finished installation...car running like crap

          Eh btw, since im noobin a turbo install up I gotta find out where to tap into a vacuum line at too for my bov, gauge and wastegate. So where was sufficient for you? There's the brake booster line which I dunno would be such a great idea.. then that 90 elbow on the throttle body you mentioned.. then somewhere around the MAP. At least I'm pretty sure that's the MAP on the left side near the back of the intake manifold.

          TEAM C6V6

          Comment


          • #20
            Re: finished installation...car running like crap

            Originally posted by Blizzard242 View Post
            Eh btw, since im noobin a turbo install up I gotta find out where to tap into a vacuum line at too for my bov, gauge and wastegate. So where was sufficient for you? There's the brake booster line which I dunno would be such a great idea.. then that 90 elbow on the throttle body you mentioned.. then somewhere around the MAP. At least I'm pretty sure that's the MAP on the left side near the back of the intake manifold.
            yea you can tee off of the map sensor
            http://www.bowtiev6.com/

            Comment


            • #21
              Re: finished installation...car running like crap

              There's 2 vacuum lines comming from it, does it matter which one? I'm geussing it doesn't because I looked in there and it looks like it's a straight shot through. omg is my throttle body dirty too. Very unhappy about that.

              Quick rant. I bought the damn car from my brother to turn into my "race car" because I know all it's been through and how it's been driven. It's a 98 and it has almost the same amount of miles as my 02 that I've driven since mi 17 on the odometer. I've been racing my 02 at the track almost purely stock and he's been pussy footin around in his and my 02 is in wayyyyyyyyyyy better condition. I'm willing to bet it's because I take care of it myself and I don't take it to the dealership to get "inspections" or "oil changes" that turn into way more. I knew I heard a valves leaking and apparently it's more than the exhaust sides. ****ER!~

              And yeah thank you 97rs. As always I appreciate the help.

              TEAM C6V6

              Comment


              • #22
                Re: finished installation...car running like crap

                yea we teed off the front line as it was easiest to access for the custom powerdyne setup we made.
                http://www.bowtiev6.com/

                Comment


                • #23
                  Re: finished installation...car running like crap

                  x's 2

                  1999 Firebird Y87/W68

                  Comment

                  Latest Topics

                  Collapse

                  There are no results that meet this criteria.

                  FORUM SPONSORS

                  Collapse
                  Working...
                  X