new 1 3/4 turbo headers im ade the for my 99 camaro with fordged bottem end. For use with a gt4088 turbo.
Announcement
Collapse
No announcement yet.
new turbo headers
Collapse
X
-
Re: new turbo headers
I'm sure there will be one coming from the other side..... Just not that far yet.
Make sure you have some abilty to let the system expand/contract... flex pipe in the cross-over or a couple joints that can grow with out leaking.
It'll crack welds like crazy if not...
Looks good so far!
~Scott
Comment
-
Re: new turbo headers
yea i hope there is another turbo going on the other side, welds dont look the greatest but as long as they seal thats all that matters!
76 Camaro Rally Sport-355/TH350- Soon to be LT1/TH350 with a little laughing gas to wake it up...;)
89 Ram D350 CTD/M5- 1 Ton Dually getting 27 MPG's
Comment
-
Re: new turbo headers
Originally posted by UDLOSE98 View Postwhats the story on this?
also your spark plugs and wires are going to be in trouble.
udlose why are they going to be in trouble the primaries are kinda close but i would think that the heat protectors on the wire ends would help to keep them from melting, just let me know what you mean...
76 Camaro Rally Sport-355/TH350- Soon to be LT1/TH350 with a little laughing gas to wake it up...;)
89 Ram D350 CTD/M5- 1 Ton Dually getting 27 MPG's
Comment
-
Re: new turbo headers
yea there is a nother one on the other side this pictures is from when i first started there all heat wraped and heat painted under the wrap. It a single gt4088 turbo. motor is complete forged internals stock heads small comp cam, tran stock rebuilt with 3800 fuddle stall. With the older header setup i made the car put down 505 rwhp and 548 rwtq on 20 psi. i ran the car with the new setup and ran 2.122 60' 5.334 330 8.001 1/8 94.5 1/8 mph 1000' 10.260 12.22 1/4
i let of at the 1000' because i was tuning the car and then it started to rain so i never got a nother run
Comment
-
Re: new turbo headers
any question fell free to im me turbo99camaro names jason heres some more pics and a few videos
http://s216.photobucket.com/albums/c...Picture154.flv
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...2 weeks ago
Comment