Tweet
Okay guys on my drvrs side the door handle is coming off and I noticed that the car doesn't lock or unlock itself with my remote. Also the door handle doesn't open the car. My question is I see the rod and how to connect it to the handle so I got that much, but how do I tighten the door handle back down. What kind of screws go there, and whats the best tool to tighten it with?
-
-
Re: Door handle help
Interior or Exterior door handle?
Unable to lock/unlock, check fuses first, then check BCM.<a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a> -
Re: Door handle help
Exterior HandleComment
-
Re: Door handle help
I don't believe there is anything you can "tighten up". Once it breaks, it usually breaks, in my experience.<a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a>Comment
-
Re: Door handle help
Its not really broken the handle is off the rod and the screws that hold the handle in are of so I can just pull the handle up. It's not really broken it just needs to be put back into placeComment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago
Comment