Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Aerodynamics of the extended spoiler. But see if cleaning out the condensor works , helped mine , there was alot of debris in there had to make 2-3 passes with the pressured air hose.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Just start from the top and work your way to the bottom going side to side, I use a air compressor with a long air sprayer works vey good , I could see the dirt blowing out the other side of it. Or I haven't tried it but I think would work, spray it down with engine degressor and use a pressure washer to clean it out, same method as the other.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Just start from the top and work your way to the bottom going side to side, I use a air compressor with a long air sprayer works vey good , I could see the dirt blowing out the other side of it. Or I haven't tried it but I think would work, spray it down with engine degressor and use a pressure washer to clean it out, same method as the other.
I have done this procedure many times. With compressed air and a pressure washer. The compressed air works best because with the pressure washer your making a mess with water getting all over everything. And its really just spraying dirt all over stuff. Compressed air would be quicker anyways cause you don't have to hook up the water lines to the pressure washer.
Just start from the top and work your way to the bottom going side to side, I use a air compressor with a long air sprayer works vey good , I could see the dirt blowing out the other side of it. Or I haven't tried it but I think would work, spray it down with engine degressor and use a pressure washer to clean it out, same method as the other.
I don't have an air compressor, but I have a wet and dry vac, these vacs work as blowers too. Do you think it going to work? I understand the condenser and the radiator are together. What's the distance between both?
Tomorrow I'm going to make an 80 mile trip, so I need to do this early morning.
Camaro99\'3.8, original spoil package (no body mods...PROUDLY), K&N, Lid 3800II, SLP CAI, Flowmaster, Z28Chrome Tips, 180* Thermostat.
Aerodynamics of the extended spoiler. But see if cleaning out the condensor works , helped mine , there was alot of debris in there had to make 2-3 passes with the pressured air hose.
Sorry, but the answer is too general. What Aerodynamics do?
You're right, cleaning the condenser is the first thing to do. I'm very anxious to work on this tomorrow morning. I'll let you know right after I'm done.
Camaro99\'3.8, original spoil package (no body mods...PROUDLY), K&N, Lid 3800II, SLP CAI, Flowmaster, Z28Chrome Tips, 180* Thermostat.
Know anyone with a air compressor. Thats going to be the only true way to get everything out. You will waste your time IMO with a wet and dry vac.
X2, Thats why I suggessted maybe engine degreesor so the pressure of the cans to get in the fins , then maybe a pressure washer at one of those self service car washes to get on the junk out. I have done that before on the radiator and condsenor.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Done. I did something very quick in my friend's shop. He has compressor and recomended to get a conderser cleaner at the A/C shop, when it's applied it looks like white foam.The condenser wasn't too dirty, but still has tiny rocks very clogged that the pressured air didn't get out. I did not repeat the procedure, because I needed to rush back to home to take care of my kid. Maybe I'll try something else next weekend. But I tested the car, I left it on for 10 minutes, after that I drove 10 minutes to home and left it on again for about 15 to 20 minutes. I did something like that before and the gauge started raising over 210. The temp gauge didn't go over 210 this time, and the indicator was little behind 210 too, it looks that the problem is solved. I didn't notice any significant difference in the A/C performance. Today I didn't make it for my 80 mile trip, I'll do it tomorrow and I'll see how the car behaves on the expressway and right after on idle. I'll let you know.
Camaro99\'3.8, original spoil package (no body mods...PROUDLY), K&N, Lid 3800II, SLP CAI, Flowmaster, Z28Chrome Tips, 180* Thermostat.
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
4 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment